Chief Delphi - Portcullis Thickness

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Portcullis Thickness (http://www.chiefdelphi.com/forums/showthread.php?t=143796)

Boltman

13-02-2016 17:37

Re: Portcullis Thickness

Notes:
1. Material: 1/8" Clear Polycarbonate
2. Grid to be painted black on one side.

NOTE: Secure the
bottom of the
Portcullis
Polycarbonate using
#10-24 hardware.

Mark McLeod

13-02-2016 17:37

Re: Portcullis Thickness

The polycarb is only on the Courtyard side (?).
Then the bar.

Then the Neutral zone.

P.S.
I think I reversed which side the polycarb is on, so don't take that on my word.

ICE_Bear

13-02-2016 17:46

Re: Portcullis Thickness

Thank you all for your help!!! This was very informative :]

ICE_Bear

13-02-2016 17:49

Re: Portcullis Thickness

Sorry if any of my comments seemed sarcastic, I didn't mean them to be.

Boltman

13-02-2016 18:03

Re: Portcullis Thickness

No problem... I like to know how things are constructed now we know too.

All times are GMT -5. The time now is 22:04.

Page 2 of 2

Show 100 post(s) from this thread on one page