Chief Delphi - Running 2 Cim motors on a single Talon SR

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Running 2 Cim motors on a single Talon SR (http://www.chiefdelphi.com/forums/showthread.php?t=143851)

CoachC

14-02-2016 13:28

Running 2 Cim motors on a single Talon SR

Is it possible to run two cims on the same side of a drivetrain with a single talon SR? The drivetrain we plan to run will incorporate 2 Cims on either side of the bot. If so please let me know how to set up and wire.

Thanks in advance

MaGiC_PiKaChU

14-02-2016 13:33

Re: Running 2 Cim motors on a single Talon SR

No, see R53

dradel

14-02-2016 13:33

No must have a separate motor controller per cim per rules

Ether

14-02-2016 13:33

Re: Running 2 Cim motors on a single Talon SR

Quote:

Originally Posted by CoachC (Post 1540129)

Is it possible to run two cims on the same side of a drivetrain with a single talon SR?

Rule R53 in Section 4 of the Game Manual.

Jon Stratis

14-02-2016 13:55

Re: Running 2 Cim motors on a single Talon SR

Instead of running them off the same speed controller, use a PWM splitter to send the same signal to two different speed controllers. That way you can be sure you're running the motors the same.

CoachC

14-02-2016 14:02

Re: Running 2 Cim motors on a single Talon SR

Thanks for all the quick responses.

Have a great day :)

All times are GMT -5. The time now is 15:22.