![]() |
Are these tanks legal?
I know the white Clippard ones are illegal, but we are unsure if these ones are. Unfortunately, they are all unmarked. It would help if we could determine what these are, whether or not they are the white Clippard tanks, since we heard not all white plastic tanks were illegal.
![]() |
Re: Are these tanks legal?
I know some people will argue otherwise, but illegal or not, I would not use ANY plastic tanks on my robot. The failure mode is simply too dangerous.
|
Re: Are these tanks legal?
If they are unmarked, you can't provide a part number and related specifications to show that they are rated to the required pressure, can you?
so I expect they are not legal just because of that. |
Re: Are these tanks legal?
The RI will not like them. Don't use it. That's my advice
|
Re: Are these tanks legal?
Without a brand it's sketchy imo. Breaking $50 on new black Clippards could save you a lot of headache (or just heads in general).
|
Re: Are these tanks legal?
Please verify the source of the tanks, they look similar to the pneuair tanks that we have been using for 3 years and other teams have been using since 2010. I've use dozens of these from pneuair and never had an issue. The only explicity illegal air tanks are the white clipplard brand air tanks. All other tanks that meet all the rules are legal but it is in the team to show documenation proving it.
|
Re: Are these tanks legal?
Where did you get the tanks? They look a lot like the tanks that AndyMark sells which have no markings on them which are legal.
Here is one of the 3 unmarked tanks they sell. http://www.andymark.com/product-p/am-2477.htm |
Re: Are these tanks legal?
Quote:
A good rule of thumb is, and this is for any COTS item with a not easily recognizable part number, keep a copy of the invoice or receipt from where it was purchased. A data sheet is even better to show the inspector. |
Re: Are these tanks legal?
Quote:
|
Re: Are these tanks legal?
Quote:
I have been close to a plastic (non-first) 1 liter volume that failed at 100 PSI. I can tell you I am lucky to be here (the volume blew out away from me). The only way I'll have plastic pneumatic volumes on my teams robots is if it is completely enclosed in a box (to absorb as much of the energy as possible) and even with this setup, I would be reluctant to do so. |
Re: Are these tanks legal?
If the tank has no markings, then you can't prove the white tank is NOT the disallowed tank. Thus I would reject is as an RI.
Are there any PSI markings on the tank? If you can't prove the tank can hold 125 PSI safely, then that is another reason to reject the tank. |
Re: Are these tanks legal?
Hi!
We have been using these tanks since they went on sale back in the day. I can't tell from here the exact volume or port sizes your tanks feature, but searching up am-2477, am-2478, and am-2479 should give you relevant technical specifications that would help guide all but the most skittish RIs at your events. I also recommend getting some masking tape and writing "NOT CLIPPARD TANKS, PLEASE STOP COMING OVER TO OUR PIT AND TRYING TO TAKE OUR TANKS" because in my experience that will save you some stress. It's your job as a team to make sure your robot is easy to inspect just as much as it is an RIs job to know what they need to look for when inspecting a robot. I believe Allen is an LRI at various events. In this thread he's probably the foremost authority. I think it would be super if everyone else in legality threads could either feign honest understanding or step back instead of fearmonger, but I'm not a cop and can't tell people what to do. |
Re: Are these tanks legal?
Quote:
|
Re: Are these tanks legal?
Quote:
That said, if I remember correctly, the illegal Clippard tanks very clearly say "Clippard" on them. |
Re: Are these tanks legal?
Quote:
Coastal Pneumatics seems to have bought out Pneuaire who we used to purchase from but they seem to be the same tanks. Here is the data sheet on the storage volume chambers we have been using for several years without incident. https://www.coastpneumatics.com/pdf/RC%20canisters.pdf I've posted this in other threads, I've have never been told of any plastic tank failures other than the white Clippard tanks. It's also my understanding the white Clippard tanks were the first plastic air storage devices that Clippard produced and they made them specifically for FRC. Clippard is an awesome sponsor of our program and they have gotten the design correct with their updated black tanks. Other companies that have been producing white storage volumes for many years have not had the same issues as the original white Clippard tanks. Teams please keep track of your purchases and have data sheets ready for your inspectors. |
| All times are GMT -5. The time now is 04:56 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi