Chief Delphi - 775 pro shield

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - 775 pro shield (http://www.chiefdelphi.com/forums/showthread.php?t=144022)

JamesTerm

21-04-2016 10:09

Re: 775 pro shield

The make great salt shaker coasters too. :)

jspatz1

21-04-2016 10:51

Re: 775 pro shield

2 Attachment(s)

We have been using a similar 775 cover for a couple of years. It has some compliance to the fit and clamps on with a clamping screw. Ventilation holes provide for cooling. There is room for standard spade terminals, and the wire exit hole can be turned to whatever orientation is best.

stoddard

21-04-2016 12:23

Re: 775 pro shield

What do you do to connect the wire to the motor?

Cam_Team 2619

21-04-2016 13:07

Re: 775 pro shield

1 Attachment(s)

I appreciate seeing a more official version of this... Team 2619 has been utilizing cut pieces of PVC tubing that slide over the motor to protect our wires...

My apologies for the poor photo quality, this was the best angle I could find.

All times are GMT -5. The time now is 21:36.

Page 2 of 2

Show 100 post(s) from this thread on one page