Chief Delphi - A few questions about Talon SRX's.

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - A few questions about Talon SRX's. (http://www.chiefdelphi.com/forums/showthread.php?t=144066)

A few questions about Talon SRX's.

Hey, Programmer from 3098 here, and I have a few questions about Talons, mainly in the Slave/Master mode.

Should we see the Current for the follower Talon in the roborio webpage?
Should the lights on the follower talon match the master talon?
If the master talon is set to invert direction, does the follower automagicallly become inverted as well, or does that need to be inverted seperately?

Thank you in advance!

Re: A few questions about Talon SRX's.

Quote:

Originally Posted by NegativeZero (Post 1542017)

Hey, Programmer from 3098 here, and I have a few questions about Talons, mainly in the Slave/Master mode.

Should we see the Current for the follower Talon in the roborio webpage?
Should the lights on the follower talon match the master talon?
If the master talon is set to invert direction, does the follower automagicallly become inverted as well, or does that need to be inverted seperately?

Thank you in advance!

1) Yes, all sensors are still active on slaves .
2) Yes, unless your slave is inverted.
3) Yes, the follower will invert as well.