Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - PWM (http://www.chiefdelphi.com/forums/showthread.php?t=144075)

nlt5	18-02-2016 08:08

PWM

We have used all of our PWM slots on the rio and we need one more. Can anyone tell me if we are allowed to use a splitter to run two servos on one PWM port?

Thanks

Arhowk

18-02-2016 08:11

Re: PWM

Yes that is legal. You cannot split PDP power but you can split PWM signal

Ari423

18-02-2016 08:14

Re: PWM

You can also use an MXP extension board to get the extra PWM pins from there.

GeeTwo

18-02-2016 09:12

Re: PWM

If you're running two servos (as opposed to two motor controllers), make sure your 6V and 0V wires are big enough to carry the current to drive both servos; don't use a 26AWG PWM cable.

nlt5	18-02-2016 10:11

Re: PWM

Great! Thanks for the help and advice.

All times are GMT -5. The time now is 02:15.