Chief Delphi - pic: 3452 Chich the Door Teaser

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: 3452 Chich the Door Teaser (http://www.chiefdelphi.com/forums/showthread.php?t=144199)

GabbySaurus

20-02-2016 02:00

pic: 3452 Chich the Door Teaser

Type	20-02-2016 02:01

Re: pic: 3452 Chich the Door Teaser

Note name is still in progress...

BBray_T1296

20-02-2016 03:56

Re: pic: 3452 Chich the Door Teaser

Bumpers?

Type	20-02-2016 08:16

Re: pic: 3452 Chich the Door Teaser

Quote:

Originally Posted by BBray_T1296 (Post 1543094)

Bumpers?

They are not on the robot in this picture. We will probably post another that contains them at some point.

BBray_T1296

20-02-2016 11:21

Re: pic: 3452 Chich the Door Teaser

Quote:

Originally Posted by Type (Post 1543100)

They are not on the robot in this picture. We will probably post another that contains them at some point.

Alright cool. Just want to make sure they exist.

Nifty looking robot! Hard to tell if it is ground aluminum or steel for the whole intake structure but either way looks like it could get hit and be fine (an important thing to consider).

Good luck to you!

Type	21-02-2016 00:18

Re: pic: 3452 Chich the Door Teaser

Quote:

Originally Posted by BBray_T1296 (Post 1543138)

Thanks, you too! We had a practice event today and learned our bumpers will need to be mounted a little differently.

Fusion_Clint

21-02-2016 00:32

Re: pic: 3452 Chich the Door Teaser

Cool bot, does that arm extend more than 15 inches from the frame perimeter when taking in boulders? It looks very close.

Type	21-02-2016 08:53

Re: pic: 3452 Chich the Door Teaser

Quote:

Originally Posted by Fusion_Clint (Post 1543500)

Cool bot, does that arm extend more than 15 inches from the frame perimeter when taking in boulders? It looks very close.

In this picture it extended beyond 15", I think it was 19" but we shortened it down so it didn't exceed the rules.

All times are GMT -5. The time now is 12:00.