Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Running more than 8 motors URGENT (http://www.chiefdelphi.com/forums/showthread.php?t=144230)

dirtbikerxz 20-02-2016 14:21

Running more than 8 motors URGENT
 
How can you run more than 8 motors (talon srx). The pdp only has 8 "ports". Are you allowed to split?

Knufire 20-02-2016 14:25

Re: Running more than 8 motors URGENT
 
You can run motors off 30A breakers in the smaller slots.

Bob Steele 20-02-2016 15:27

Re: Running more than 8 motors URGENT
 
Are you referring to controlling the talons or to powering them?

You can power them through the 20-30 Amp breakers or the 40 Amp breakers. You CANNOT have two controllers on the same breaker. (R-45)

Just remember the wiring requirements... 12 gauge works for everything.
If you choose to use smaller diameter wire you would have to use a corresponding breaker that matches. (14 ga minimum for 30 Amp Breakers or 18 ga minimum for 20 amp breakers)

Of course you could use 12 gauge or bigger for anything you want.

We are using all 16 of the slots for motors this year.


All times are GMT -5. The time now is 07:49.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi