Chief Delphi - Robot Not Running Straight

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Robot Not Running Straight (http://www.chiefdelphi.com/forums/showthread.php?t=144292)

RoboBucs

21-02-2016 00:36

Robot Not Running Straight

So essentially everything on our robot is running as it's supposed to with the exception of driving. The robot won't stay in a straight line in both autonomous and teleop. What we want to do is slow down the motors on one side in the program. How would we this? Thanks!

Mark McLeod

21-02-2016 08:51

Re: Robot Not Running Straight

Multiply the wire going into the faster motor Set by a %, e.g. x.8 would be 80% power.

RoboBucs

21-02-2016 18:54

Re: Robot Not Running Straight

Thanks!

whitetail

21-02-2016 19:16

Re: Robot Not Running Straight

If your robot isn't driving straight , try calibrating the speed controllers that you are using that should help.

All times are GMT -5. The time now is 04:20.