Chief Delphi - D-Link off 5V 500ma???

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - D-Link off 5V 500ma??? (http://www.chiefdelphi.com/forums/showthread.php?t=144435)

rich2202

22-02-2016 16:24

D-Link off 5V 500ma???

I know the D-links have a 1.4 amp max draw, but that is with the wifi turned on.

If we turn off the wifi, any thoughts on whether we can power it from the 5v 500 ma connection on the VRM?

The Camera will be on the 5V 2A (1.5A continuous) connection.

billbo911

22-02-2016 16:34

Re: D-Link off 5V 500ma???

Quote:

Originally Posted by rich2202 (Post 1544497)

Educated guess here. Will you be doing this to use the Switch functionality of the D-Link?
If so, you may want to pick up one of these switches.
They run off of 5v and cost less than $10.

As far as your original question, I would not suggest it.
As an RI and FTAA this year, I would have hard time approving it.

Quote:

R57 One (1) OpenMesh Wireless Bridge (P/N: OM5P-AN), that has been configured with the appropriate

encryption key for your team number at each event, is the only permitted device for communicating

to and from the ROBOT during the MATCH.

The D-Link DAP1522 radio distributed from 2011-2015 is not legal for

2016 FIRST Robotics Competition Competition.

MrRoboSteve

22-02-2016 16:38

Re: D-Link off 5V 500ma???

Q817 indicates that you can use the D-Link as a switch.

https://frc-qa.firstinspires.org/Que...hernet-devices

techhelpbb

22-02-2016 16:41

Re: D-Link off 5V 500ma???

Quote:

Originally Posted by billbo911 (Post 1544504)

these switches.
They run off of 5v and cost less than $10.

The manufacturer says this needs 5V at 600mA.
Just mentioning that.

rich2202

22-02-2016 16:46

Re: D-Link off 5V 500ma???

Quote:

Originally Posted by techhelpbb (Post 1544508)

The manufacturer says this needs 5V at 600mA.
Just mentioning that.

Hmm... might give the VRM fits. If we are only using 1.3 amps off the 2 amp circuit, can we draw extra off the 500ma circuit?

billbo911

22-02-2016 17:03

Re: D-Link off 5V 500ma???

Quote:

Originally Posted by techhelpbb (Post 1544508)

The manufacturer says this needs 5V at 600mA.
Just mentioning that.

Thanks, good spec to keep track of.

Alan Anderson

22-02-2016 22:33

Re: D-Link off 5V 500ma???

Quote:

Originally Posted by rich2202 (Post 1544512)

If we are only using 1.3 amps off the 2 amp circuit, can we draw extra off the 500ma circuit?

Sorry, no. The VRM's 500 ma outputs are designed to limit the current.

All times are GMT -5. The time now is 02:34.