Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)
-   -   Frame Perimeter Protrusions? (http://www.chiefdelphi.com/forums/showthread.php?t=144473)

Frc4741Rvhs 22-02-2016 21:46

Frame Perimeter Protrusions?
 
We are looking at our frame perimeter and our ball intake wheel sticks out 1 inch from our frame. The wheels are also located in an opening in our frame. Is this legal or not? Thanks.

EricH 22-02-2016 21:52

Re: Frame Perimeter Protrusions?
 
I can't see a picture, so I can't fully comment, but here are some things to keep in mind:

1" for a wheel is probably going to be too much for a "minor protrusion". That intake wheel will define the Frame Perimeter. Unfortunately, it's active, so that would be an articulated Frame Perimeter, so it's illegal.

I suggest a redesign...

whitetail 22-02-2016 21:56

Re: Frame Perimeter Protrusions?
 
Does the wheel move and if so in one position does it fit inside the frame? If not then time for a last minute redesign.

Frc4741Rvhs 22-02-2016 22:13

Re: Frame Perimeter Protrusions?
 
Thanks for the quick reply. Redesign in progress. Hoping for a hail mary :deadhorse:


All times are GMT -5. The time now is 11:02.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi