Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   Team 484: Roboforce 2016 Robot, Albert (http://www.chiefdelphi.com/forums/showthread.php?t=144700)

keco185 24-02-2016 21:05

Team 484: Roboforce 2016 Robot, Albert
 
Team 484 is proud to preset...
Albert



Albert's Specs:

Drivetrain
  • 4 x 8 inch pneumatics
  • 4 cim direct drive 12:1 gear ratio
  • 5 inch ground clearance

Shooter/Intake
  • 2 mini cims with 1:1 gearing
  • Belt driven
  • 2 x 8 inch pneumatic wheels
  • Talon SRX controllers set for voltage compensation

Vision
  • Kangaroo coprocessor
  • AXIS IP camera

Capabilities
  • Independently crosses category A, B, and D defenses
  • Fits under low bar
  • Vision assisted shooting from 50 to 190 inches
  • Shoots high or low goal
  • Climber TBA

We're excited to see you at MAR Springtide-Chestnut Hill and MAR Westtown!

thatprogrammer 24-02-2016 22:01

Re: Team 484: Roboforce 2016 Robot, Albert
 
Quote:

Originally Posted by keco185 (Post 1546384)
Kangaroo coprocessor

I've been hearing about this being on a few robots this year. What is this?
Thanks!

keco185 24-02-2016 22:05

Re: Team 484: Roboforce 2016 Robot, Albert
 
Quote:

Originally Posted by thatprogrammer (Post 1546413)
I've been hearing about this being on a few robots this year. What is this?
Thanks!

It's an intel based computer (Intel Atom) not too unlike a raspberry pi except more consumer oriented and more powerful. It comes with windows 10 preinstalled but we wiped it and put debian on. Here's a link to the website for it: http://www.kangaroo.cc

MikLast 24-02-2016 23:40

Re: Team 484: Roboforce 2016 Robot, Albert
 
Quote:

Originally Posted by keco185 (Post 1546415)
(Intel Atom)

Im personally surprised on how well this processor runs for traditional Windows applcations (like windows 10) Its really cool to see on a robot! Awesome bot guys!

logank013 24-02-2016 23:45

Re: Team 484: Roboforce 2016 Robot, Albert
 
I feel like this is the major topic of this year but I take it those aren't your competition bumpers? That font is probably not legal...

keco185 25-02-2016 11:57

Re: Team 484: Roboforce 2016 Robot, Albert
 
Quote:

Originally Posted by logank013 (Post 1546475)
I feel like this is the major topic of this year but I take it those aren't your competition bumpers? That font is probably not legal...

The only rule I saw in the manual relevant to bumper lettering was R28 which says nothing about font so long as it is easy to read and has a 1/2 inch stroke. Am I missing something?

Quote:

R28 Team numbers must be displayed and positioned on the BUMPERS such that an observer walking around the perimeter of the ROBOT can unambiguously tell the Team’s number from any point of
view and meet the following additional criteria:
A. consist of numerals at least 4 in. high, at least 1⁄2 in. in stroke width, and be either white in color or outlined in white
...

theawesome1730 25-02-2016 11:59

Re: Team 484: Roboforce 2016 Robot, Albert
 
I don't think the backwards 4 would be legal either.

Minc3r_ 25-02-2016 12:01

Re: Team 484: Roboforce 2016 Robot, Albert
 
Quote:

Originally Posted by keco185 (Post 1546745)
The only rule I saw in the manual relevant to bumper lettering was R28 which says nothing about font so long as it is easy to read and has a 1/2 inch stroke. Am I missing something?

I'd be concerned about the backwards 4 because it could easily be mistaken for a 9.

keco185 25-02-2016 12:05

Re: Team 484: Roboforce 2016 Robot, Albert
 
Quote:

Originally Posted by theawesome1730 (Post 1546746)
I don't think the backwards 4 would be legal either.

We've had the backwards 4 every year and haven't had to change it yet. Although, since there has been a lot of discussion this year about what is allowed on a bumper, that could change. Thanks for pointing it out, we're so used to it we didn't even consider that.

M.O'Reilly 25-02-2016 12:12

Re: Team 484: Roboforce 2016 Robot, Albert
 
Quote:

Originally Posted by Minc3r_ (Post 1546749)
I'd be concerned about the backwards 4 because it could easily be mistaken for a 9.

I think what you mean is the font makes the 4 look like 9. Backwards 4 looks like the letter P. In either case, I've seen this team year after year with this logo, I'd be surprised if they were told to change it. My advice: just roll with it, they look cool.


All times are GMT -5. The time now is 07:27.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi