3D Printable Electrical Wire Clip
 

Hey teams! We've designed a few 3D printable parts that work with the RoboRIO. The parts are made to hold the wires you put into the PWM, DIO, Analog and Relay ports in place during the Robot's movement. They are fastened with simple zip-ties and when properly attached will hold the wires in place very well. The parts are available on Thingiverse at http://www.thingiverse.com/thing:1380606. Feel free to use these on your robots!

https://drive.google.com/file/d/0B-9...ew?usp=sharing

https://drive.google.com/file/d/0B-9...ew?usp=sharing

https://drive.google.com/file/d/0B-9...ew?usp=sharing

Re: 3D Printable Electrical Wire Clip
 

Cool idea! Good for this years game especially.

Re: 3D Printable Electrical Wire Clip
 

Ok, this has to be the best thing I have seen in a long time on here. We wanted something like this but just didn't have the time. Our solution (black tape and check every match) was not ideal. We will be printing these out tonight!

Re: 3D Printable Electrical Wire Clip
 

These are great, although not a new idea. We used Wildstang's version the past two years. Thanks for posting, looks like you've improved on it.

Re: 3D Printable Electrical Wire Clip
 

I forgot to mention that we did base this design off another, found at https://grabcad.com/library/roborio-...er-lock-clip-1. My apologies for any confusion.