Chief Delphi - Legality of running a capacitor inline with roboRIO power

Page 4 of 4

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Legality of running a capacitor inline with roboRIO power (http://www.chiefdelphi.com/forums/showthread.php?t=145310)

Ether

03-07-2016 02:09 PM

Re: Legality of running a capacitor inline with roboRIO power

The OP has not specified under what conditions the motors brown out when up on blocks.

I did not see any mention of how many motors are in his drivetrain or what drivetrain motor controllers are being used.

With e.g. 6 motors being commanded by controllers without voltage ramping, and given the high-motor-speed 4.75ft/s gearing, is it not possible to have up-on-blocks motor brownouts for step throttle changes from full forward to full reverse... even if all the wiring is correct?

Fletch1373

03-16-2016 02:15 PM

Re: Legality of running a capacitor inline with roboRIO power

Quote:

Originally Posted by EricH (Post 1552382)

At the risk of getting another "Unnecessary Sarcasm Flag" thrown, I agree with this. This is CS101 Syndrome: "It's perfect, I did it!" Guess it applies to electrical as well... Get someone who isn't familiar with your wiring to examine it if you can. They'll be more able to find the problem easily than you are, because they don't think "Oh, that's normal" on something that might not be right.

I second the rubber-duck debugging technique.

TIL Software == Electrical

All times are GMT -5. The time now is 08:51 PM.

Page 4 of 4

Show 100 post(s) from this thread on one page