How are teams with GoPro's connecting them to their monitors?
 

We are using a GoPro for our camera pole. How are teams connecting them to their monitors? I am particularly interested if anyone found a method for switching between the GoPro and robot camera on their displays, such as connecting it through the computer. Thanks in advance!

Re: How are teams with GoPro's connecting them to their monitors?
 

Typically teams are using a micro HDMI to standard HDMI cable directly to a monitor with an HDMI input

Re: How are teams with GoPro's connecting them to their monitors?
 

We have a separate 27" monitor that only our go pro displays through. We plug the hdmi cord directly into the go pro from the monitor.

Re: How are teams with GoPro's connecting them to their monitors?
 

We bought a micro HDMI to regular HDMI adapter, and then a long HDMI cable.


The only way for GoPro's to stream (other than wireless) is via HDMI, so I don't think you are going to find a variety of answers.

We are using my 3rd monitor (in reality it's a small TV with an HDMI input) that is drilled and screwed to the driver station board.

Re: How are teams with GoPro's connecting them to their monitors?
 

The monitor we use is too old to have an HDMI port so we have a total of six adapters/wires/extenders to go from micro HDMI to VGA including one that has to have a 5V DC Charger going to it or it won't work.

Re: How are teams with GoPro's connecting them to their monitors?
 

If you have a monitor with a DVI input, you can adapt from HDMI directly to that with a single cable. HDMI and DVI are electrically equivalent for the video portion. I have a cable for my raspberry pi that is HDMI on one end and DVI on the other.

Re: How are teams with GoPro's connecting them to their monitors?
 

We wanted to use a GoPro since it had high quality but we couldn't afford it as a team, but luckily one of our sponsors is letting us borrow their camera :) . We bought a micro hdmi to HDMI cable, 10 feet long to run down our pole, then we will have another monitor, either a 19" or ~22". The only problem is we need to adapt from HDMI to DVI, which does anyone know of a cheap adapter that works? The cheapest on Amazon is like $30 from what I saw, and I could probably find an actual cable that length from HDMI to DVI.

Also, how are teams keeping their GoPro charged? Are you just plugging it in after the match or do you run a micro usb cable up your pole to charge it?

Re: How are teams with GoPro's connecting them to their monitors?
 

http://www.monoprice.com/product?p_id=2285 $15 15ft HDMI to DVI Video only.

Re: How are teams with GoPro's connecting them to their monitors?
 

Do you know of any like adapter pieces? I just ordered a 10ft micro hdmi to HDMI so I would prefer not to order this, and find something I could plug directly into the monitor. Even if it may cost a little more, less connects to go wrong. Going this path, I would need the Micro HDMI to hdmi, then an HDMI to HDMI, then the HDMI to DVI cable.

Re: How are teams with GoPro's connecting them to their monitors?
 

We (I) bought a micro HDMI to regular HDMI adapter at Wal-Mart for $40.

Re: How are teams with GoPro's connecting them to their monitors?
 

Thanks for the help. I'll try to figure out the best solution to setting up our camera.

Re: How are teams with GoPro's connecting them to their monitors?
 

I was wrong on the price: I found my receipt, it was 19.24 for the adapter, and then $20 for a long HDMI cable (because we forgot to bring any with us)

This was the item we bought:

http://www.walmart.com/ip/GE-miniHDM...apter/48988768

Re: How are teams with GoPro's connecting them to their monitors?
 

HDMI to DVI adapters are ridiculously cheap at Monoprice :)

http://www.monoprice.com/product?c_i...seq=1&format=2

Re: How are teams with GoPro's connecting them to their monitors?
 

On another note besides connecting their GoPros, how are teams connecting their monitor to their drivers station if they are using a separate monitor? I'm redesigning my team's driver station and trying to figure out a way to secure it. But make it easy to remove if needed to.

Re: How are teams with GoPro's connecting them to their monitors?
 

While probably not the best solution, we have simply put Velcro on the base of the monitor and put it next to the driver station. It has not fallen yet and is easy to remove, but a bit annoying to setup.