Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   Dlink DCS-933L connecting to roboRealm (http://www.chiefdelphi.com/forums/showthread.php?t=146932)

medofbr 09-04-2016 20:49

Dlink DCS-933L connecting to roboRealm
 
Hello,
I am trying to use a D-link DCS-933L ip camera with Roborealm for my team's vision code, but I can not get Roboealm to find the camera.

The camera is set up via its app and you can view its video feed through the phone.

Using the read HTTP command I used these settings,
Camera Type: D-link DCS-2102 (only d-link option)
Url: http://192.168.2.58/video/mjpg.cgi?profieid=1
Username and Password are put in
No HTTP Headers
Refresh Frequency:ASAP
Timeout: 1000ms
this does not work.

For the D-Link internet camera command:
ip Adress:192.168.2.58
Port: 80
Username and Password are put in
Refresh Frequency:ASAP
camera Type:DCS 900/920
This does not work either.

I tried this on the KOP router and a Belkin router but neither of these worked

If you know what I am doing wrong please reply

Thanks,
Ben

Mark McLeod 09-04-2016 21:04

Re: Dlink DCS-933L connecting to roboRealm
 
Is the IP on the computer that RoboRealm is running on compatible with the default camera IP address you are using (e.g., 192.168...)?
Our standard FRC IP addresses are either 169.254.... in the pit or 10.TE.AM... on the playing field.
Giving the camera a static IP compatible with your RoboRealm PC or setting it to use DHCP is preferable.

medofbr 09-04-2016 21:08

Re: Dlink DCS-933L connecting to roboRealm
 
The laptop's ip is 192.168.2.56
should i change both ip's to 10.54.04.2, 10.54.04.5 (or some other #)?

Mark McLeod 09-04-2016 21:18

Re: Dlink DCS-933L connecting to roboRealm
 
As long as they are compatible then I wouldn't worry too much about the IPs for now, just get things to work. Eventually you'll need to change them for competition.

You should be able to use a web browser to view the camera stream with the camera directly connected to the PC.
I haven't played enough with RoboRealm to be much help debugging that interface, but I'd suggest getting the standard one's to work first.

medofbr 09-04-2016 21:41

Re: Dlink DCS-933L connecting to roboRealm
 
Using settings in the browser got it to work!

Thanks.


All times are GMT -5. The time now is 09:55.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi