Right Angle Adapter for VersaPlanetary Gearbox
 

The Killer Bees are proud to share this design with the FIRST community.
This is a great adaptation for use on your robots.
We have 2 of these on our machine this year and they work great.

Our students have done an excellent job creating a step by step Instructables tutorial on how to fabricate and implement this design


http://www.instructables.com/id/90-D...netary-Gearbo/

Enjoy!!

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Wonderful! This looks really handy, although not a ton easier than just using the Vex miter gears. What advantages would you say this method has over that?

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Very clever! I'm sure we'll be using something like that in future years. Thanks for sharing :D

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Very interesting, I'll have to keep this bookmarked for future design applications.

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Is that a 775 proXL?
Does it have 4/3 the power because it's longer?
Where can I get mine?:D
/s

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Great idea! Seems like a lot of extra broaching though

Is there a reason not to use a nut driver like this to connect to 1/2 hex shaft? Is there too much slop in these nut drivers?

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Very cool build, I'd never thought of using that Dewalt drive.

I love the detail in the step by step:

... leaving nothing to chance!

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

This is so cool! Thanks for sharing!

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

We actually used a very similar design for our intake.

Kinda blurry, but those vertical wheels are being powered through a similar design. Ours is actually belted through a custom gear box, then belted again!

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Definitely bookmarked for future use. Thanks for sharing Jim!

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

You broke instructables.... :(

(kidding, but bummed that I can't read this article now)

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

VEX Pro request - 1/4" hex Versaplanetary output shaft.

Pretty slick Bees, great write up!

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

It would have to be steel or titanium otherwise it would fail easily because of the torque. It would be even weaker than the CIM motor output shaft, which fails at 29 N-m.

I hope that VEXpro will come out with their own right angle adaptor with 1/2 hex output with replaces the conventional output stage of the VP as it would greatly enhance the way they can be utilised.

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Another great design from the Bees.

Re: Right Angle Adapter for VersaPlanetary Gearbox
 

Awesome! I'll have to remember that these right angle adapters exist, nice little product.

Instead of broaching, I wonder if using a socket adapter for a drill (like this) and a 1/2" socket would be more feasible for most teams.