Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Our x1902 Stuffed Oreo, See You In St. Louis (http://www.chiefdelphi.com/forums/showthread.php?t=147306)

XenObliv 04-17-2016 04:54 PM

pic: Our x1902 Stuffed Oreo, See You In St. Louis
 

Jalerre 04-17-2016 04:55 PM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
Is that a lunacy wheel? We have a few laying around but we would never consider using them on our robot. Glad it's working well for you guys.

TDav540 04-17-2016 05:02 PM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
It would be pretty great if you guys just decided to hand out oreos in your pit :)

asid61 04-17-2016 05:04 PM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
In other news, is that chain tensioner an aluminum hex standoff?
EDIT: Digging the avatar BTW.

Sperkowsky 04-17-2016 05:06 PM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
Quote:

Originally Posted by Jalerre (Post 1574395)
Is that a lunacy wheel? We have a few laying around but we would never consider using them on our robot. Glad it's working well for you guys.

Looks to me like a lunacy wheel and 2 And AM 60A rubber grip wheels.

Agreed I have one sitting in my room now and I would never think they would be a good choice.

XenObliv 04-17-2016 05:24 PM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
Quote:

Originally Posted by asid61 (Post 1574400)
In other news, is that chain tensioner an aluminum hex standoff?
EDIT: Digging the avatar BTW.

Correct, just as a temporary replacement for our belt. It's not the best but it's sufficient for one day of testing.
And thank you.

cbale2000 04-17-2016 08:29 PM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
What reduction are you using on that pair of 775pros out of curiosity?

XenObliv 04-18-2016 05:54 PM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
Quote:

Originally Posted by cbale2000 (Post 1574482)
What reduction are you using on that pair of 775pros out of curiosity?

The gearbox is a 1:1. So no reduction.

Max Boord 04-18-2016 08:55 PM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
Quote:

Originally Posted by XenObliv (Post 1575033)
The gearbox is a 1:1. So no reduction.

What compression?

Also have you guys tried running wider wheels or multiple wheels in a line? That seemed to help with accuracy and power over doing the small-big-small wheeled approach.

cbale2000 04-19-2016 12:08 AM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
Quote:

Originally Posted by XenObliv (Post 1575033)
The gearbox is a 1:1. So no reduction.

Wow, and here I thought our 3:1 was overkill. :eek:

Michael Hill 04-19-2016 05:48 AM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
I came into this thread hoping for a bacon-stuffed Oreo (hey, it's not out of the question. Have you SEEN the Oreo fillings that have been out lately?)

XenObliv 04-22-2016 10:41 AM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
Quote:

Originally Posted by Max Boord (Post 1575116)
What compression?

Also have you guys tried running wider wheels or multiple wheels in a line? That seemed to help with accuracy and power over doing the small-big-small wheeled approach.

The ball gets compressed about two and a half inches. We have not tried more than the one lunacy wheel, the smaller wheels are simply be used as flywheels. The compression seems to be only relevant to the friction, which to limit the rotational energy so that more of the total energy goes towards transnational. This gets a straighter shot, one without backspin, allowing us to be very accurate close up.

BenHildy 04-22-2016 10:51 AM

Re: pic: Our x1902 Stuffed Oreo, See You In St. Louis
 
Looks like you guys were using your wheels for a much more constructive purpose than we were. We just ran ours at ridiculous speeds and let it bounce on the floor while spinning. We regret that, as it was quite dangerous.


All times are GMT -5. The time now is 12:37 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi