Chief Delphi - 2014 Driver Station software

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - 2014 Driver Station software (http://www.chiefdelphi.com/forums/showthread.php?t=147902)

zippy36jr

29-04-2016 08:58

2014 Driver Station software

So I am bringing back our 2014 robot back from the dead and working on another small project on the side with the CRio and I can not find the 2014 driver station. If anyone knows where I could find it, it would be appreciated.

dubiousSwain

29-04-2016 09:00

Re: 2014 Driver Station software

Quote:

Originally Posted by zippy36jr (Post 1580274)

I am not in front of a computer with a DS right now, but on the settings tab of the DS, you can switch protocols. Using the older protocol might work.

cpapplefamily

01-05-2016 14:00

Re: 2014 Driver Station software

Quote:

Originally Posted by dubiousSwain (Post 1580276)

I am not in front of a computer with a DS right now, but on the settings tab of the DS, you can switch protocols. Using the older protocol might work.

I too was looking at the 2014 OPTION. The driverstatation only had 50% connection with the crio. The crio was before my time. I don't recall the error we had. Something like "robot controller and driverstatation not able to communicate "the indicator on the DS was 50% green

Ben Wolsieffer

01-05-2016 14:34

Re: 2014 Driver Station software

Quote:

Originally Posted by cpapplefamily (Post 1581088)

When using the 2016 DS with the cRIO, the half green/half red connection indicator means the robot is connected. It never is fully green when using the 2014 protocol.

spat	06-05-2016 18:21

Re: 2014 Driver Station software

Well, you can still download the FRC 2014 software using the following links:

- NI Software for FRC 2014
- FRC 2014 Update Suite

Greetings!

All times are GMT -5. The time now is 07:27.