![]() |
Team 5254 HYPE 2016 CAD Release
Team 5254, HYPE, is proud to present the CAD for our 2016 robot, Pathfinder. This robot was built with almost exclusively COTS parts, mostly using the VEXPro VersaFrame system. There are a variety of 3D printed parts used for motor controller mounting, potentiometer mounting, polycord pulleys, and to push the ball into our shooter wheels.
![]() You can download the STEP file from grabCAD. This file is our robot as of IRI without the climber that was attached to the intake. CAD Model: grabcad.com/library/frc-team-5254-2016-pathfinder-1 Team Website: www.frc5254.com/2016-robot If you have any questions or want more details, feel free to ask. |
Re: Team 5254 HYPE 2016 CAD Release
I can't seem to find the place where you mounted the BB sensor, could you point that out?:)
|
Re: Team 5254 HYPE 2016 CAD Release
Do you also happen to have w/e CAD you did for your Skystalker-er-er-er prototype?
|
Re: Team 5254 HYPE 2016 CAD Release
Quote:
|
Re: Team 5254 HYPE 2016 CAD Release
Quote:
|
Re: Team 5254 HYPE 2016 CAD Release
Quote:
I'll look and find the CAD for both our initial prototype robots. We built an initial robot that had a different arm and a 6-wheel drive and then switched to the final design. 5kystalker was the second prototype bot which then turned into our practice robot. Here is a photo album of some photos throughout the process. You can also look at the technical binder on our website which shows some of our prototype progression. |
| All times are GMT -5. The time now is 07:06. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi