Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Deal on motor controllers (http://www.chiefdelphi.com/forums/showthread.php?t=149951)

cloudroth6 09-08-2016 14:04

Deal on motor controllers
 
So i was just looking though Andy mark (as you do before the start of the school year). I found the Simple Arduino Mecanum Control (http://www.andymark.com/product-p/am-2973.htm), which is Two Victor SP speed controller with two 30 Amp breakers, for only a $100. normally all this would cost $132, so your saving $32.

Im just bringing this to everyone attention so everyone can know how to save a couple of bucks

GeeTwo 09-08-2016 14:08

Re: Deal on motor controllers
 
The correct link.

Owen Busler 09-08-2016 14:09

Re: Deal on motor controllers
 
Edit: Sniped by GeeTwo

I dont think that link is what you meant.

http://www.andymark.com/set-of-two-m...-p/am-0844.htm

this is for batteries

cloudroth6 09-08-2016 14:17

Re: Deal on motor controllers
 
Quote:

Originally Posted by GeeTwo (Post 1600336)

Quote:

Originally Posted by Owen Busler (Post 1600337)
Edit: Sniped by GeeTwo

I dont think that link is what you meant.

http://www.andymark.com/set-of-two-m...-p/am-0844.htm

this is for batteries

Oops my bad, thank you for the corrections , i have fixed the link. Thank you again

ASD20 09-08-2016 15:12

Re: Deal on motor controllers
 
Quote:

Originally Posted by cloudroth6 (Post 1600334)
which is Two Victor SP speed controller with two 30 Amp breakers, for only a $100.

I'm seeing the price as $125.

orangemoore 09-08-2016 15:18

Re: Deal on motor controllers
 
Quote:

Originally Posted by ASD20 (Post 1600349)
I'm seeing the price as $125.

I believe that someone from AndyMark realized their mistake after seeing this thread and fixed the price.

ThaddeusMaximus 09-08-2016 15:55

Re: Deal on motor controllers
 
Quote:

Originally Posted by orangemoore (Post 1600350)
I believe that someone from AndyMark realized their mistake after seeing this thread and fixed the price.

That's why you keep your trap shut about these things... :rolleyes:

cloudroth6 09-08-2016 16:40

Re: Deal on motor controllers
 
Quote:

Originally Posted by ThaddeusMaximus (Post 1600356)
That's why you keep your trap shut about these things... :rolleyes:

Except i don't believe in not sharing information that might be helpful to other people

ASD20 09-08-2016 16:42

Re: Deal on motor controllers
 
This is one case where I really wish Andymark didn't listen to their customers so well.

Billfred 09-08-2016 23:24

Re: Deal on motor controllers
 
Quote:

Originally Posted by ASD20 (Post 1600361)
This is one case where I really wish Andymark didn't listen to their customers so well.



(For the record, no I wasn't the one that saw this thread. First time on Chief since Sunday with family in town!)


All times are GMT -5. The time now is 02:18.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi