VEX Ultrasonic Ping-Response sensor
 

Hello,
we are trying to study about rangefinder sensors and we would like to know how to connect it to the roboRio.

Re: VEX Ultrasonic Ping-Response sensor
 

Can you post a link or info about which Vex sensor you are trying to use?

Re: VEX Ultrasonic Ping-Response sensor
 

If you man the Parallax PING))) Ultrasonic Distance Sensor, this is ready to plug directly into an analog I/O port with nothing but a dual female 3-pin dupont (header) cable. I have personally used it on arduino, and for analog inputs, these seem to be 100% hardware compatible with the 'RIOs. IIRC, the analog read value just needs to be scaled linearly (mx+b) to get range.

Most rangefinder sensors that say they are 5V or 3.3V analog can be used with the analog I/O, though some have more non-linear conversions (we have used a Sharp sensor that had a v=1/r relationship between voltage and range).

Digital rangefinders may be simple binary (yes/no), which is definitely supported on the DIO port, or some sort of serial I/O interface, which would require more specific info to evaluate.