Chief Delphi - Screw Size for Tetrix Motor

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FIRST Tech Challenge (http://www.chiefdelphi.com/forums/forumdisplay.php?f=146)

- - Screw Size for Tetrix Motor (http://www.chiefdelphi.com/forums/showthread.php?t=151936)

Stephen41

17-10-2016 22:23

Screw Size for Tetrix Motor

I have a question, what is the size of the screw used to connect a shaft encoder to a Tetrix motor?

pilleya

18-10-2016 04:21

Re: Screw Size for Tetrix Motor

Quote:

Originally Posted by Stephen41 (Post 1612249)

I have a question, what is the size of the screw used to connect a shaft encoder to a Tetrix motor?

I don't believe that there is a shaft encoder for the Tetrix Motor. You might be thinking of the Andymark Neverest motor( it's quite a bit larger) which has a hall effect encoder mounted to the back of it. Any small Phillips head screw driver should be able to undo the two screws attaching the hall effect encoder on the back.

mmkkrk

18-10-2016 10:19

Re: Screw Size for Tetrix Motor

Screw size is 3mm.

All times are GMT -5. The time now is 21:19.