Chief Delphi
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   FRC Themed Jack-o'-lanterns. (http://www.chiefdelphi.com/forums/showthread.php?t=152139)

wajirock 31-10-2016 13:33
FRC Themed Jack-o'-lanterns.
 
I decided to make some FRC themed jack-o'-lanterns using my computer. I used Adobe Illustrator and Photoshop to make the STEAMWorks and 4607 ones, and I used a website I found to make the 254, 2056, and 2052 ones. I hope you guys like them.

Bkeeneykid 31-10-2016 18:02
Re: FRC Themed Jack-o'-lanterns.
 
These look awesome, but I would not like the job of carving that FIRST Steamworks pumpkin...

RoboChair 31-10-2016 18:36
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by Bkeeneykid (Post 1614440)
These look awesome, but I would not like the job of carving that FIRST Steamworks pumpkin...
Just CNC the thing!
https://www.youtube.com/watch?v=-rfcOmlgeKI

1493kd 31-10-2016 20:16
Re: FRC Themed Jack-o'-lanterns.
 
My 3 year old daughter requested a robot pumpkin. Who was I to say no🤖😉

http://imgur.com/2k4USZg
http://imgur.com/UCIsMHF

ctt956 31-10-2016 20:47
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by Bkeeneykid (Post 1614440)
These look awesome, but I would not like the job of carving that FIRST Steamworks pumpkin...
I thought about carving it in real life, but then I reconsidered the difficulty of it...:p

Quote:
Originally Posted by RoboChair (Post 1614449)
My thoughts exactly. Only I didn't have a CNC machine, so I had to carve the old fashioned way with the exception of tracing patterns with a Dremel. :cool:

These FIRST pumpkins are awesome! I noticed the "4" in the 254 logo seems to be traced so as to be cut out completely; is that a mistake by the application, or is it just engraved deeply enough to let the light through?

RoboChair 31-10-2016 20:50
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by ctt956 (Post 1614472)
These FIRST pumpkins are awesome! I noticed the "4" in the 254 logo seems to be traced so as to be cut out completely; is that a mistake by the application, or is it just engraved deeply enough to let the light through?
They are photo-shopped.

ctt956 31-10-2016 21:15
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by RoboChair (Post 1614475)
They are photo-shopped.
Yes, but the 254 logo in the picture would not be possible in real life because the "4" would be cut out. I guess it was a mistake by the software, since the computer isn't aware of that.

roboruler 31-10-2016 21:20
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by ctt956 (Post 1614479)
I guess it was a mistake by the software, since the computer isn't aware of that.
It's an online application which just changes the colour of an image then pastes it over a picture of a pumpkin lol no smarts included.

wajirock 31-10-2016 21:30
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by ctt956 (Post 1614479)
Yes, but the 254 logo in the picture would not be possible in real life because the "4" would be cut out. I guess it was a mistake by the software, since the computer isn't aware of that.
I don't really know much about pumpkin carving or the application itself, but I think you're correct. Some of the other ones I made also had impossible designs.

tickspe15 31-10-2016 23:05
Re: FRC Themed Jack-o'-lanterns.
 
A student on my old team(1318) decided to carve our logo into a pumpkin this year.

https://www.facebook.com/FRC1318/pho...type=3&theater

Jared Russell 31-10-2016 23:48
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by RoboChair (Post 1614449)
Why CNC when you can waterjet! https://www.youtube.com/watch?v=tboIuTzrxVI

Kristian Calhoun 31-10-2016 23:56
Re: FRC Themed Jack-o'-lanterns.
 
One of our alumni carved our team logo into a pumpkin a few years ago! https://www.instagram.com/p/u0Y55NHOx3/

frcguy 01-11-2016 00:07
Quote:
Originally Posted by Jared Russell (Post 1614502)
Why CNC when you can waterjet! https://www.youtube.com/watch?v=tboIuTzrxVI

why

roboruler 01-11-2016 00:11
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by frcguy (Post 1614506)
why
not

jaredhk 01-11-2016 10:13
Re: FRC Themed Jack-o'-lanterns.
 
Quote:
Originally Posted by RoboChair (Post 1614449)
Quote:
Originally Posted by ctt956 (Post 1614472)
My thoughts exactly. Only I didn't have a CNC machine, so I had to carve the old fashioned way with the exception of tracing patterns with a Dremel.
This was done on our laser cutter:


All times are GMT -5. The time now is 17:17.
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi