Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   FIRST Tech Challenge (http://www.chiefdelphi.com/forums/forumdisplay.php?f=146)
-   -   [FTC]: Moving Beacon (http://www.chiefdelphi.com/forums/showthread.php?t=152288)

ArtemusMaximus 14-11-2016 14:10

[FTC]: Moving Beacon
 
watching some FTC Matches videos I noticed this
https://www.youtube.com/watch?v=8QcA...youtu.be&t=33s

I hope they moved beacon back

Isonine 14-11-2016 14:18

Re: [FTC]: Moving Beacon
 
That's a new one. Didn't see any of that happen last year. Hopefully it's not a reoccurring theme?

MattRain 14-11-2016 14:58

Re: [FTC]: Moving Beacon
 
Whoever was in charge of setting up the field, did not do a good job. The whole field is out of spec.

1) White Lines are 2in, suppose to be 1in
2) Corner Vortex as not flat on the ground
3) Manufacturing plastic covering still on the clear deflection shields under the center vortex goals.
4) The deflection shields are really crooked
5) Beacons aren't bolted down (Hence the moving)
6) Beacon Images below are just slapped on and crooked.


TEAMS: If you see this at your event. You can request them to fix it. The field is not in spec.

cadandcookies 14-11-2016 16:35

Re: [FTC]: Moving Beacon
 
Quote:

Originally Posted by MattRain (Post 1616274)
Whoever was in charge of setting up the field, did not do a good job. The whole field is out of spec.

1) White Lines are 2in, suppose to be 1in
2) Corner Vortex as not flat on the ground
3) Manufacturing plastic covering still on the clear deflection shields under the center vortex goals.
4) The deflection shields are really crooked
5) Beacons aren't bolted down (Hence the moving)
6) Beacon Images below are just slapped on and crooked.


TEAMS: If you see this at your event. You can request them to fix it. The field is not in spec.

This x100. I know how much work goes into setting up the field, but that field is far out of spec for all of those reasons.

Additionally, the red/blue tape in the center is supposed to be 100% on the center vortex base plate.


All times are GMT -5. The time now is 16:56.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi