![]() |
Re: [FRC Blog] FIRST Choice 2017
Quote:
|
Re: [FRC Blog] FIRST Choice 2017
Lest you think the AndyMark people got some jump, 5402 got its first seven, then #10, then #12.
(We loaded up on Talons, SPs, CIMs, a spare VRM and signal light, and some fans because it's historically a pain to get a truly legal one in the heat of build season.) |
Re: [FRC Blog] FIRST Choice 2017
Quote:
|
Re: [FRC Blog] FIRST Choice 2017
1 Attachment(s)
We got 23 of the top 24 items on the priority list that was used. :)
Unfortunately, the list wasn't exactly in the order I thought it was. The only one which likely had impact was the NavX being moved from #3 to #14. :( I didn't know why I had put the compressor on the list. I couldn't possibly have foreseen that we would break one last night. (The arm of an pre-season robot rammed into the "christmas tree" on the compressor, breaking off the threads which secure the check valve.) Well, the replacement is already on the way! :D The bent and broken rods on a couple of Bimba cylinders re-used from our Aerial Assist robot probably won't be replaced. :o Edit: And yes, a signal light - last thing that we got! |
Re: [FRC Blog] FIRST Choice 2017
We did not get a RSL because we saw that it is coming in the kickoff kit. Then again, they are always a rarity. We got a PDP, 4 Talons, the accelerometer & gyro, and the navX-micro.
|
Re: [FRC Blog] FIRST Choice 2017
We got items #1-#14 and #17 from our list.
|
Re: [FRC Blog] FIRST Choice 2017
4 tallons
4 CIM motors A Nvidia TX1 A Ten Degrees of Freedom MXP sensor from Analog Devices An AMT 103-V encoder |
Re: [FRC Blog] FIRST Choice 2017
Quote:
|
Re: [FRC Blog] FIRST Choice 2017
We at 159 got some pretty good stuff. A PD Board, four Talon SRXs, a PCM, and two CIMS. This was all the stuff we really wanted. This amounted to 740 credits, the last 10 came from... Drum-roll please... a Shaft coupling hub. Coupling Disc and matching hub not included. This is what happens when you don't pay attention to things you put low on your list. You get a third of a shaft coupling.:confused:
|
Re: [FRC Blog] FIRST Choice 2017
Quote:
|
Re: [FRC Blog] FIRST Choice 2017
Quote:
Quote:
Quote:
1) move to something cheaper 2) move to something that is easier to mount 3) make it easier to wire and use. Make rotating beacons great again! |
Re: [FRC Blog] FIRST Choice 2017
Quote:
|
Re: [FRC Blog] FIRST Choice 2017
Quote:
|
Re: [FRC Blog] FIRST Choice 2017
Everything is better than the flags.
|
Re: [FRC Blog] FIRST Choice 2017
Quote:
Mostly we ordered key items that we pay for from time to time, but also put in for things that looked like they would be neat to have in the prototyping bag of tricks, like the Oldhams. |
| All times are GMT -5. The time now is 23:37. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi