Urgent need of 20T gear with 1/2" hex bore
 

TechFire 225 is in need of 2 - 20t Gear with 1/2" Hex Bore 217-2702 (VEX).

If any MAR or Chesapeake teams have 2 we can borrow we will replace them after they come back in stock at VEX.

We are in need of these before December 4th if possible. We can pick up or will pay for shipping

Please PM me if you can help us out.

Thanks,

Donnie

Re: Urgent need of 20T gear with 1/2" hex bore
 

Worst case if you don't find the Vex gear, you could broach an Andymark am-0186 or a Martin S2020BS (available on Amazon Prime) or you can bore and broach a McMaster 6325K83. Do note, the non-AndyMark gears are likely to be hardened and tough to broach.

Re: Urgent need of 20T gear with 1/2" hex bore
 

Thanks, will try the AM gear if nobody close has one. The mcmaster and Martin would require a little turning down as we need it for our 3 cim ballshifter transmission 3rd stage. :-( the AM one looks like we could use it after we broach it.

Appreciate the advice.

Re: Urgent need of 20T gear with 1/2" hex bore
 

Sent you a PM.

Re: Urgent need of 20T gear with 1/2" hex bore
 

Just ordered from WCP, as they had in stock.

Thank you so much!!

http://www.wcproducts.net

Donnie :)