Chief Delphi - NavX Micro Case

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - NavX Micro Case (http://www.chiefdelphi.com/forums/showthread.php?t=152779)

Munchskull

12-22-2016 12:41 PM

Re: NavX Micro Case

Quote:

Originally Posted by cpapplefamily (Post 1622928)

I attached the .ipt part files and .step files to the thingiverse page. I know it can be at times difficult to take a thingiverse .stl thing and get it into Inventer but it can be done. I hope this part works well for all of you.

I use Solidworks and for some reason it scales stl files to wildly inaccurate sizes.

snoman

12-29-2016 06:11 PM

Re: NavX Micro Case

In all seriousness though just printed this part it fits together very nicely and holds the device very well

slibert

12-29-2016 06:21 PM

Re: NavX Micro Case

Quote:

Originally Posted by cpapplefamily (Post 1622826)

We found the case that is included to print did not work well. I sketched this up and it fit my board perfectly and with not broken tabs.

http://www.thingiverse.com/thing:1988260

The existing navX-Micro enclosure was designed for FTC use, this one seems like a better fit for FRC.

Ok if we put a link to this on the navX-Micro website?

cpapplefamily

01-02-2017 12:00 AM

Re: NavX Micro Case

Quote:

Originally Posted by slibert (Post 1623901)

The existing navX-Micro enclosure was designed for FTC use, this one seems like a better fit for FRC.

Ok if we put a link to this on the navX-Micro website?

Yes please do!

cpapplefamily

01-02-2017 12:01 AM

Re: NavX Micro Case

I made some updates to the cover. Better view through the holes to the board, lengthen the standoff to hold the board down snug, and better iD's of what each hole is.

cpapplefamily

01-02-2017 12:08 AM

Re: NavX Micro Case

All times are GMT -5. The time now is 10:26 PM.

Page 2 of 2

Show 100 post(s) from this thread on one page