Chief Delphi - NavX Micro Case

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - NavX Micro Case (http://www.chiefdelphi.com/forums/showthread.php?t=152779)

cpapplefamily

12-21-2016 09:07 PM

NavX Micro Case

We found the case that is included to print did not work well. I sketched this up and it fit my board perfectly and with not broken tabs.

http://www.thingiverse.com/thing:1988260

snoman

12-21-2016 09:11 PM

Re: NavX Micro Case

Cool

Poseidon5817

12-21-2016 09:49 PM

Re: NavX Micro Case

Cool

niklas674

12-21-2016 09:59 PM

Re: NavX Micro Case

Cool?

wsh32

12-21-2016 10:08 PM

Re: NavX Micro Case

Cool!

Bluman56

12-21-2016 10:21 PM

Re: NavX Micro Case

~Cool~

Harrison.Smith

12-21-2016 10:23 PM

Re: NavX Micro Case

¡Cool!

Poseidon5817

12-21-2016 10:33 PM

Re: NavX Micro Case

Mission complete, good job men.

*Continue with serious discussion*

What exactly was wrong with the provided case that you needed to design a replacement? Would you say the issues were major, or minimal?

Harrison.Smith

12-21-2016 10:34 PM

Re: NavX Micro Case

In all seriousness, what prompted y'all to want a case for the NavX?

cpapplefamily

12-21-2016 11:02 PM

Re: NavX Micro Case

Quote:

Originally Posted by Harrison.Smith (Post 1622852)

In all seriousness, what prompted y'all to want a case for the NavX?

Protection of the board and something to build a fastening system off of ie match holes in AM4U Chassis. The NavX (Micro) does not mount directly to the Roborio.

asid61

12-22-2016 12:47 AM

Re: NavX Micro Case

Very neat! I like your Kangaroo case too.

Munchskull

12-22-2016 03:13 AM

Re: NavX Micro Case

Could you post the CAD file too? That way I can use the model in my teams robot.

rlance

12-22-2016 09:14 AM

Re: NavX Micro Case

Quote:

Originally Posted by cpapplefamily (Post 1622826)

We found the case that is included to print did not work well. I sketched this up and it fit my board perfectly and with not broken tabs.

http://www.thingiverse.com/thing:1988260

Thanks for posting this. I just ordered one from the web-site.

cpapplefamily

12-22-2016 11:17 AM

Re: NavX Micro Case

Quote:

Originally Posted by Munchskull (Post 1622893)

Could you post the CAD file too? That way I can use the model in my teams robot.

I attached the .ipt part files and .step files to the thingiverse page. I know it can be at times difficult to take a thingiverse .stl thing and get it into Inventer but it can be done. I hope this part works well for all of you.

cpapplefamily

12-22-2016 11:19 AM

Re: NavX Micro Case

Quote:

Originally Posted by asid61 (Post 1622884)

Very neat! I like your Kangaroo case too.

Thank you. I didn't like how HOT it ran. Runs ice cold now.

Munchskull

12-22-2016 12:41 PM

Re: NavX Micro Case

Quote:

Originally Posted by cpapplefamily (Post 1622928)

I use Solidworks and for some reason it scales stl files to wildly inaccurate sizes.

snoman

12-29-2016 06:11 PM

Re: NavX Micro Case

In all seriousness though just printed this part it fits together very nicely and holds the device very well

slibert

12-29-2016 06:21 PM

Re: NavX Micro Case

Quote:

Originally Posted by cpapplefamily (Post 1622826)

We found the case that is included to print did not work well. I sketched this up and it fit my board perfectly and with not broken tabs.

http://www.thingiverse.com/thing:1988260

The existing navX-Micro enclosure was designed for FTC use, this one seems like a better fit for FRC.

Ok if we put a link to this on the navX-Micro website?

cpapplefamily

01-02-2017 12:00 AM

Re: NavX Micro Case

Quote:

Originally Posted by slibert (Post 1623901)

The existing navX-Micro enclosure was designed for FTC use, this one seems like a better fit for FRC.

Ok if we put a link to this on the navX-Micro website?

Yes please do!

cpapplefamily

01-02-2017 12:01 AM

Re: NavX Micro Case

I made some updates to the cover. Better view through the holes to the board, lengthen the standoff to hold the board down snug, and better iD's of what each hole is.

cpapplefamily

01-02-2017 12:08 AM

Re: NavX Micro Case

All times are GMT -5. The time now is 10:26 PM.