Chief Delphi - Last Years RPM

Page 1 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Last Years RPM (http://www.chiefdelphi.com/forums/showthread.php?t=15291)

Brett W

29-11-2002 19:10

Last Years RPM

I was just curious how had the highest output RPM last year? this is another attempt at a normal thread.

Mike Schroeder

29-11-2002 21:54

The RObot that had the Highest RPM would have to be my 1989 Ford Bronco. it was at almost every competiton and would have competed if it wernt against the law to have a Flashing Blue/Red light on my car

evulish

29-11-2002 22:28

It may have also gone a tad bit over the weight limit...but that, of course, could easily have been fixed by drilling holes in it :D

Mike Schroeder

29-11-2002 22:30

Hmm a swiss cheese Bronco NOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!

FotoPlasma

30-11-2002 04:39

You could replace "Big Mike" with a smaller Mike... that might reduce the weight...

;)

Mike Schroeder

30-11-2002 10:52

Quote:

Originally posted by FotoPlasma
You could replace "Big Mike" with a smaller Mike... that might reduce the weight...

;)

Just as long as no one puts weight reduction holes in me

evulish

30-11-2002 14:40

*puts away his drill* Yeah...uhh...ohh.

Madison

30-11-2002 23:28

Can we fill you with helium?

Mike Schroeder

01-12-2002 01:35

No, I think That would hurt (/Chimpunk Voice):cool:

Matt Attallah

01-12-2002 11:27

Quote:

Originally posted by "Big Mike"
The RObot that had the Highest RPM would have to be my 1989 Ford Bronco. it was at almost every competiton and would have competed if it wernt against the law to have a Flashing Blue/Red light on my car

I also had a Bronco, FULL SIZE, and it had the 5.0 (all you ford peeps are happy) w/ the 4x4! And it was all under weight thanks to RUST! (That just shows you FORD Sucks)

:D :rolleyes:

Mike Schroeder

02-12-2002 21:42

the CJ was the 1st Jeep, and if Fords "sucked" then they wouldnt be in buisness still now would they'

Brett W

02-12-2002 22:03

When i started this i kind of meant to see robot RPM seeing this is a technical board for robots. I really miss talk about robots. i can't wait 1 month and two days. All this talk about where the championship will be and the segway is getting a little tiresome.

Madison

02-12-2002 22:53

Quote:

Originally posted by Brett W
When i started this i kind of meant to see robot RPM seeing this is a technical board for robots. I really miss talk about robots. i can't wait 1 month and two days. All this talk about where the championship will be and the segway is getting a little tiresome.

I think the conversation went askew because nobody is really too sure what you're asking about.

RPM of what, exactly? Wheels? Who was fastest? They're not synonymous.

Could you clarify yourself some, please?

Ken Leung

02-12-2002 23:38

Thanks M. ;)

Next time, guys, when you see a post with unclear questions, try to do what M did and suggest to the person that maybe his/her original post wasn't clear enough for others to understand what he/she meant, instead of going off topic.

Brett was just trying to start a conversation. What would you feel if someone cut you off in the middle of a thread you started and start talking about something else?

Mike Schroeder

02-12-2002 23:48

If that is the case Mr. Ken :P

The Silver Scorpion ran at about 5500 Rpm using 2 chiapua mortors

i think the gear ratio was like 33:1 but dont quote me on that

i am not sure a bout the other motors we used, but they were 2 window motors for the claws and a seat motor for our "Mini-Me"Hope that helped

All times are GMT -5. The time now is 13:54.

Page 1 of 2

Show 100 post(s) from this thread on one page