Chief Delphi - Help with CAN Talon SRX set-up and use.

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Help with CAN Talon SRX set-up and use. (http://www.chiefdelphi.com/forums/showthread.php?t=153004)

Hess1113

05-01-2017 19:43

Help with CAN Talon SRX set-up and use.

Hello I am new with CAN for the Talon SRX. We are using the LabView program for programming. I am confused on how to program the CAN for the talon motors. I have read the reference manuals for the talons. Anything helps. Thanks.

forbes

05-01-2017 19:52

Re: Help with CAN Talon SRX set-up and use.

This is the reference manual you are referring to?

In section 3.2.1 it shows the LabVIEW code for setting up a simple CAN Talon and setting the motor value to a joystick value. Do you have any specific questions about that code?

Hess1113

06-01-2017 10:58

Re: Help with CAN Talon SRX set-up and use.

Quote:

Originally Posted by forbes (Post 1625688)

I had not seen this manual. I believe this will help. Thank you very much.:D

Ether

06-01-2017 11:13

Re: Help with CAN Talon SRX set-up and use.

Quote:

Originally Posted by Hess1113 (Post 1625879)

I had not seen this manual. I believe this will help. Thank you very much.:D

There are two other SRX manuals in addition to the one Evan linked for you.

You can find them on the manufacturer's web site.

Hess1113

07-01-2017 21:39

Re: Help with CAN Talon SRX set-up and use.

Quote:

Originally Posted by Ether (Post 1625885)

There are two other SRX manuals in addition to the one Evan linked for you.

You can find them on the manufacturer's web site.

Thank you for the other two manuals. :cool:

All times are GMT -5. The time now is 00:56.