Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Inventor (http://www.chiefdelphi.com/forums/forumdisplay.php?f=57)
-   -   FRC 2017 Competition Field (http://www.chiefdelphi.com/forums/showthread.php?t=153108)

inventor_phild 08-01-2017 14:44

Re: FRC 2017 Competition Field
 
You can create a new front view based on the current view but I think you are probably looking for something more dynamic. This solution would be a single, mostly static view.

Let me think about it some more for a better solution.

Eraani Ruiz 08-01-2017 23:33

Re: FRC 2017 Competition Field
 
Hello,
My team and I tried to download the Inventor and the Fusion 360 but somehow cannot open it in neither of the programs, is there something else we need to do in order to open those files (apart of downloading the programs) or an explanation to why we cannot open them?
:confused:

Thanks

echin 08-01-2017 23:52

Re: FRC 2017 Competition Field
 
What version of Inventor/ Fusion are you using? Autodesk files are not backwards compatible (you can't open an Inventor 2017 file in Inventor 2016). If that's the issue, you could try the STEP file as others have suggested.

markmcgary 09-01-2017 01:30

Re: FRC 2017 Competition Field
 
Thank you for making the Field CAD available. The ability to visualize this game from a drive team perspective has been quite shocking. I have not seen much discussion of the visibility challenges that the AIRSHIPs are introducing to this game. I think that it will be very difficult to cycle GEARs or even FUEL depending upon your PLAYER STATION because FIELD visibility appears to vary wildly. Am I missing something?

sanddrag 09-01-2017 01:49

Re: FRC 2017 Competition Field
 
Quote:

Originally Posted by Eraani Ruiz (Post 1627587)
Hello,
My team and I tried to download the Inventor and the Fusion 360 but somehow cannot open it in neither of the programs, is there something else we need to do in order to open those files (apart of downloading the programs) or an explanation to why we cannot open them?
:confused:

Thanks

For Inventor, you might want to set your project file to the included one first, then open the assembly. Also, make sure you are running Inventor 2017. Otherwise, as mentioned, use the STEP files.

amaniace 10-01-2017 10:15

Re: FRC 2017 Competition Field
 
What scale did you use to make this? Is that explained in the video?

inventor_phild 10-01-2017 13:07

Re: FRC 2017 Competition Field
 
The parts are actual size, so 1:1.

Levi Madden 10-01-2017 18:31

Re: FRC 2017 Competition Field
 
The dimension for the baseline had been corrected in team update 1. It is NOT 9 ft 4 inches (previous manual statement). It is 7 ft 9 and 1/4 inches from the alliance wall (team update 1 statement).

Nbot 10-01-2017 19:34

Re: FRC 2017 Competition Field
 
Quote:

Originally Posted by Levi Madden (Post 1628866)
The dimension for the baseline had been corrected in team update 1. It is NOT 9 ft 4 inches (previous manual statement). It is 7 ft 9 and 1/4 inches from the alliance wall (team update 1 statement).

Props to Autodesk for making their CAD more accurate than the game manual.

protoserge 12-01-2017 20:43

Re: FRC 2017 Competition Field
 
Is the fuel modeled correctly in the KoP download? Ours is 4" diameter.

We corrected it by making the ball 2.5" diameter and the hole pattern spacing to 2.5" as well.

Hadi379 12-01-2017 20:56

Re: FRC 2017 Competition Field
 
Quote:

Originally Posted by Levi Madden (Post 1628866)
The dimension for the baseline had been corrected in team update 1. It is NOT 9 ft 4 inches (previous manual statement). It is 7 ft 9 and 1/4 inches from the alliance wall (team update 1 statement).

Quote:

Originally Posted by Nbot (Post 1628913)
Props to Autodesk for making their CAD more accurate than the game manual.

The field I downloaded has the baseline at 9ft from the alliance wall, is there an updated version out there somewhere?

inventor_phild 15-01-2017 13:50

Re: FRC 2017 Competition Field
 
Check out the field on the Autodesk website.

http://www.autodesk.com/education/co...t/all-products

Let me know if this works.

Hadi379 15-01-2017 17:11

Re: FRC 2017 Competition Field
 
Phil,

I think that link is incorrect

inventor_phild 16-01-2017 02:18

Re: FRC 2017 Competition Field
 
http://www.autodesk.com/education/co...t/all-products

CoachDotKam 16-01-2017 11:51

Re: FRC 2017 Competition Field
 
We have some video of the field from driver stations that we captured through VR. https://www.youtube.com/watch?v=r3IwrBywC7g

https://www.youtube.com/channel/UCMm...7a8p-upznqTk_w


All times are GMT -5. The time now is 17:40.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi