Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)
-   -   FRC Radio Configuration 2017 (http://www.chiefdelphi.com/forums/showthread.php?t=153218)

ChoccyMelk 08-01-2017 13:23

FRC Radio Configuration 2017
 
We were able to load the new firmware to this years radio, and get it to configure correctly. The network would not appear however, and the wireless light never comes on. We also attempted to connect in wired bridge mode to no avail. Any ideas as to how to make it work? :confused:

Jotu 08-01-2017 14:22

Re: FRC Radio Configuration 2017
 
We had issues with this as well. What worked for us was putting something in the (optional) Robot Name blank.

ChoccyMelk 12-01-2017 18:46

Re: FRC Radio Configuration 2017
 
Quote:

Originally Posted by Jotu (Post 1627231)
We had issues with this as well. What worked for us was putting something in the (optional) Robot Name blank.

That worked for us too. Thanks!

Jotu 13-01-2017 08:11

Re: FRC Radio Configuration 2017
 
There's also an updated version of the Radio Configuration tool has been released that fixes this: https://usfirst.collab.net/sf/frs/do/viewRelease/projects.wpilib/frs.frc_radio_configuration_utility.frc_radio_conf iguration_utilit_2

Repasky379 13-01-2017 19:52

Re: FRC Radio Configuration 2017
 
We're getting a similar problem. We updated firmware and configured the radio, but connecting to upload code or connect to the dashboard doesn't work. We can connect to the network through the laptop but we can't actually interact with the robot. Seems like the radio isn't communicating with the RIO.

maupalo 14-01-2017 19:33

Re: FRC Radio Configuration 2017
 
Hi, I'm having trouble loading the firmware to the radio. I'm following the instructions of this manual: http://files.andymark.com/OM5P-AN_QuickAP_Setup.pdf
It doesn't connect when it displays "Listening on interface"
Any suggestions?

AustinShalit 14-01-2017 20:36

Re: FRC Radio Configuration 2017
 
Quote:

Originally Posted by Repasky379 (Post 1630849)
We're getting a similar problem. We updated firmware and configured the radio, but connecting to upload code or connect to the dashboard doesn't work. We can connect to the network through the laptop but we can't actually interact with the robot. Seems like the radio isn't communicating with the RIO.

Did you follow R63?

Mark McLeod 14-01-2017 22:46

Re: FRC Radio Configuration 2017
 
Quote:

Originally Posted by maupalo (Post 1631282)
Hi, I'm having trouble loading the firmware to the radio. I'm following the instructions of this manual: http://files.andymark.com/OM5P-AN_QuickAP_Setup.pdf
It doesn't connect when it displays "Listening on interface"
Any suggestions?

Don't use those directions.
Use the FRC Radio Configuration Tool found at: https://usfirst.collab.net/sf/frs/do...ration_utility

And follow the directions at: Programming your radio for home use

chavezc733 03-02-2017 09:30

Re: FRC Radio Configuration 2017
 
We just recently had the same problem. What we did was download the radio configuration utility on to a another computer (We used a desktop) and it worked like a charm.
You could try doing that and hopefully it helps. I'm thinking it might be a windows10 driver issue because the laptop we were using was windows10 and that would not work. When it connected it to the desktop (running windows 7) it worked on the first try.
I contacted John Novak about the problem and his reply is as follows, "it happened to several at our workshop last week. my assessment right now is to try different computers. USB to Ethernet adapters failed and laptops need the WIFI totally disabled at the adapter level. even when I got it to work it took multiple tries. A desktop may be more likely to work"

tr6scott 03-02-2017 09:58

Re: FRC Radio Configuration 2017
 
We have also had issues running the configuration utility on laptops that have multiple ethernet adapters. We got it working by installing the configuration tool on a classmate drivers station.

(it seems the more ethernet choices the less % of being successful)


All times are GMT -5. The time now is 15:32.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi