Chief Delphi - Wiring a router without a VRM

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Wiring a router without a VRM (http://www.chiefdelphi.com/forums/showthread.php?t=153556)

Brutick

13-01-2017 10:18

Re: Wiring a router without a VRM

Quote:

Originally Posted by Mark McLeod (Post 1630468)

Read the label on the back of the OM5P-AN radio.
Note: This is only for the older OM5P-AN radio. The New OM5P-AC is looking for 24v on the Passive POE port.

POE Input:12-24v in the port closest to the barrel input.
The 802 port wants 48v

Good to know. Thanks!

frodobaggins05

14-01-2017 10:54

Re: Wiring a router without a VRM

If you're just using it for testing I advise you just use an ethernet cable. It's much easier than all the work of setting up a bridge

All times are GMT -5. The time now is 11:34.

Page 2 of 2

Show 100 post(s) from this thread on one page