Chief Delphi - size constraints

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - size constraints (http://www.chiefdelphi.com/forums/showthread.php?t=153598)

pappa swift

13-01-2017 17:48

size constraints

Under 8.2 General Robot design R03 it states the constraints for maximum size, including bumpers and all extensions are
a. 36in. by 40in. by 24 in. tall
b. 30in, by 32 in, by 36in tall

By including bumpers in the maximum size that will decreases the allowable frame dimensions by around 7 inches in width and length.
I cannot remember ever including bumpers in maximum dimensions before. Is this something new? The rules do however,exclude the bumpers for the weight of the robot (R04) is this rule correct?:

jvriezen

13-01-2017 17:50

Re: size constraints

Quote:

Originally Posted by pappa swift (Post 1630785)

Yes it is new this year, yes it is correct.

GaryVoshol

13-01-2017 18:11

Re: size constraints

Not only is it new this year, it was re-confirmed in Team Update 1 on Tuesday. You're reading those, right?

pappa swift

13-01-2017 18:17

Re: size constraints

I a now thank you

All times are GMT -5. The time now is 07:15.