Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   AndyMark G04 / R03 Communication Contest (http://www.chiefdelphi.com/forums/showthread.php?t=154128)

Jon Stratis 24-01-2017 13:25

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by rich2202 (Post 1635639)
In theory, it roughly balances out in the end.



It is less about you, and more about the non-compliant team. Teams spend a lot of effort and money to get to a competition. DQ'ing them and not allowing them to compete at all would totally ruin their season. RI's jump through a lot of hoops to help get non-compliant teams onto the field. Most solutions require disabling the non-compliant system. Unfortunately, non-compliant chassis is not an easy fix.

Letting non-compliant teams compete, but not advance, at least lets the team get on the field for their 6-8 matches. That's about as far as 2/3rds of the teams make it anyway.

Letting them on the field is Gracious Professionalism. Complaining that they may have a marginal affect on your rankings is not.

Getting them onto the field in a legal configuration is Gracious Professionalism. Back in 2013, there were two teams at each of the events I volunteered at that built their robots to the previous year's dimensions. Inspectors and other teams jumped in to help them cut 10" off the front of their robots and rework all of their mechanisms. All 4 of those teams made it to their first match. They may not of performed as well as their robot did before surgery, but they still got to play the game, they still got to work towards improvements and they were still eligible for alliance selection (I couldn't tell you how any of those teams ranked or if they made it to Saturday afternoon, unfortunately). And, I would hazard to say, everyone on those teams learned an important lesson in reading through all of the requirements for a project. That, right there, is the challenge for the inspectors and every team - working towards getting everyone at your event compliant with the rules so they can make their first match with a legal robot.

I don't think it's a bad thing to worry about how a team with an illegal robot will affect rankings. It doesn't all balance out in the end, as the qualifying rounds aren't nearly complete enough for such a thing to have no affect. As we've seen, a lucky schedule can propel a team to being an alliance captain, while an unlucky schedule can drop you way down in the rankings. Looking at the big picture, which is more gracious, allowing 1 team to compete with an illegal robot, or allowing the other 59 teams (at a 60 team regional) to compete on a level playing field?

Lil' Lavery 24-01-2017 13:35

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by rich2202 (Post 1635639)
In theory, it roughly balances out in the end.

Only if the non-compliant team has a 40% win%. They have 3 opponents they negatively influence every time they win, and only 2 partners they positively influence. As such, it requires 3 losses to every 2 wins in order for them to have a neutral impact on the standings. And even then, specific teams are going to have boons with others have negative influence.

Not to mention that winning and losing matches is a big deal in the district format, as your ranking is a crucial component of determining if you advance to the district championship and then the FRC Championship.

Quote:

Originally Posted by rich2202 (Post 1635639)
It is less about you, and more about the non-compliant team. Teams spend a lot of effort and money to get to a competition. DQ'ing them and not allowing them to compete at all would totally ruin their season. RI's jump through a lot of hoops to help get non-compliant teams onto the field. Most solutions require disabling the non-compliant system. Unfortunately, non-compliant chassis is not an easy fix.

Letting non-compliant teams compete, but not advance, at least lets the team get on the field for their 6-8 matches. That's about as far as 2/3rds of the teams make it anyway.

I fully understand the angle you're coming from. However, I have also experienced multiple incidents where teams showed up with robots built to the wrong dimensions in the past, and with the help of various teams at the event, they were able to compete. Nobody is getting "DQ'd" in this scenario, they're getting told to make their robot compliant before they are allowed on the field.

Quote:

Originally Posted by rich2202 (Post 1635639)
Letting them on the field is Gracious Professionalism. Complaining that they may have a marginal affect on your rankings is not.

Gracious professionalism is an ideal that teams and individuals strive for, not a measuring stick to evaluate the actions of others.

Chris is me 24-01-2017 13:38

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by rich2202 (Post 1635639)
Letting them on the field is Gracious Professionalism. Complaining that they may have a marginal affect on your rankings is not.

I would say it is gracious, but it is not professional. Obviously it is a nice thing to do. But not enforcing the rules punishes the teams who follow them, and reduces their legitimacy overall.

This isn't the first, second, third time a rule change will result in some teams having to modify their frames at events. In FTC, I had to do this at my very first robotics event ever. It's part of the experience, and I don't think that experience should be taken away from teams. The rules should matter.

A single win or loss is not a "marginal" effect on your rankings. It's the difference between the #1 seed and the number #3 seed, or the difference between #4 seed and #10 seed. It's not "un-GP" to want to play the same game under the same rules as your opponents despite differing personal goals.

Whatever 24-01-2017 13:49

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by Jon Stratis (Post 1635201)
....old school sizing boxes (which half the teams in FIRST have probably never seen, and no current student has!)...

One small comment - FTC uses sizing boxes so any current student in FRC that has been involved with FTC is familiar with them. Hopefully that will carry over into easier inspections for the LRIs.

engunneer 24-01-2017 14:04

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by rich2202 (Post 1635639)
Unfortunately, non-compliant chassis is not an easy fix.

At the risk of turning this into an "inspectors war stories" thread, we had a robot ant an event once that was >160 pounds and made entirely of steel and angle iron. RIs will do what it takes to get that team legal and playing, hopefully before their first match. This particular case was a saws-all and a good judge of how short to make the robot to get 40+ pounds off.

Seriously, we need an inspection war stories thread, so I made one here

Andy Baker 30-01-2017 17:08

Re: AndyMark G04 / R03 Communication Contest
 
We need more entries!

This is a reminder that this contest is over at midnight (well, 11:59.59 pm) on Wednesday, Feb. 1st.

See here for more rules.

$250 of AndyMark credit is at stake!

Andy B.

Ari423 30-01-2017 17:14

Re: AndyMark G04 / R03 Communication Contest
 
Any chance we can get an idea of current submissions so we can get an idea of how much effort we have to put in to have a chance of winning?

Andy Baker 30-01-2017 17:26

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by Ari423 (Post 1638338)
Any chance we can get an idea of current submissions so we can get an idea of how much effort we have to put in to have a chance of winning?

Nope.

Even if you don't win the $250, the teams who you educate about this rule will be the winners.

The FIRST Community needs a bunch of entries!

Andy B.

PayneTrain 30-01-2017 22:15

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by Ari423 (Post 1638338)
Any chance we can get an idea of current submissions so we can get an idea of how much effort we have to put in to have a chance of winning?

Hey Ari423,

Don't want you to worry about having to put in effort for anything in the world of FRC, etc. so I went ahead and did the hard work for you, all I ask for is a 50% cut of the proceeds for my..err...your hard work


NShep98 31-01-2017 17:30

Re: AndyMark G04 / R03 Communication Contest
 
I tried emailing at "contests" and "contest" (it's listed differently on the website and on Andy's original post) and got it bounced back both times.

PayneTrain 31-01-2017 20:42

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by NShep98 (Post 1638774)
I tried emailing at "contests" and "contest" (it's listed differently on the website and on Andy's original post) and got it bounced back both times.

Same

Billfred 31-01-2017 21:00

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by NShep98 (Post 1638774)
I tried emailing at "contests" and "contest" (it's listed differently on the website and on Andy's original post) and got it bounced back both times.

Quote:

Originally Posted by PayneTrain (Post 1638835)
Same

Strange, we tested it this afternoon. CC (my CD username)@andymark.com and we'll make sure it goes in.

Ari423 31-01-2017 21:01

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by NShep98 (Post 1638774)
I tried emailing at "contests" and "contest" (it's listed differently on the website and on Andy's original post) and got it bounced back both times.

I emailed contests @ andymark.com at around 8am this morning with my submission and it didn't get bounced back. Maybe it stopped working after that?

Billfred 01-02-2017 09:02

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by Billfred (Post 1638844)
Strange, we tested it this afternoon. CC (my CD username)@andymark.com and we'll make sure it goes in.

Quote:

Originally Posted by Ari423 (Post 1638845)
I emailed contests @ andymark.com at around 8am this morning with my submission and it didn't get bounced back. Maybe it stopped working after that?

I talked with Jerry, who oversees our email. He looked into it, and the word I heard was "whoops!".

It should be working now. :) Apply, apply, apply!

NShep98 01-02-2017 09:41

Re: AndyMark G04 / R03 Communication Contest
 
Quote:

Originally Posted by Billfred (Post 1638959)
I talked with Jerry, who oversees our email. He looked into it, and the word I heard was "whoops!".

It should be working now. :) Apply, apply, apply!

There we go. Thanks.


All times are GMT -5. The time now is 04:44.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi