Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   Bandwidth limit with onboard equipment (http://www.chiefdelphi.com/forums/showthread.php?t=154358)

ollien 27-01-2017 22:56

Bandwidth limit with onboard equipment
 
Does the 7 Mbps limit include onboard communication? For instance, if I'm sending data between an IP camera and a co-processor, am I using my 7Mbps or am I free to use as much bandwidth as I want?

simpsonboy77 27-01-2017 23:04

Re: Bandwidth limit with onboard equipment
 
Only the wireless link is throttled. The wireless bridge enforces it.

ollien 27-01-2017 23:06

Re: Bandwidth limit with onboard equipment
 
Quote:

Originally Posted by simpsonboy77 (Post 1637324)
Only the wireless link is throttled. The wireless bridge enforces it.

Is this to say that I can use as much bandwidth as I want on a wired connection ? For instance if I hooked up a switch to my setup, and put the IP cam and coprocessor in the switch, would I wouldn't be limited by the 7Mbps limit?

KosmicKhaos 27-01-2017 23:27

Re: Bandwidth limit with onboard equipment
 
Quote:

Originally Posted by ollien (Post 1637326)
Is this to say that I can use as much bandwidth as I want on a wired connection ? For instance if I hooked up a switch to my setup, and put the IP cam and coprocessor in the switch, would I wouldn't be limited by the 7Mbps limit?

Correct, the 7Mbps applies to only what is sent over wireless communications through the FMS. As long as the data is not being sent across the FMS you can use as much bandwidth as you please.


All times are GMT -5. The time now is 07:13.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi