![]() |
Help with Programming a trigger!
Hi I'm a programmer on team 5464 and we need to know how to program a motor to a trigger on a joystick. We are fairly new to Java, so you may need to explain the steps. We do not know where to begin. We have a code to move a robot.
Thank you for your time |
Re: Help with Programming a trigger!
Quote:
|
Re: Help with Programming a trigger!
Quote:
|
Re: Help with Programming a trigger!
I think it is command based in Eclipse. I could be wrong.
|
Re: Help with Programming a trigger!
Be aware that "trigger" may not always be a trigger in code. On a regular joystick you are probably going to use something like the following with shooter being some sort of motor controller such as CANTalon shooter = new CANTalon(10);
Code:
if(stick.getTrigger()) {!!!However, if you are using something like a Playstation type controller (such as Logitech F310 with switch on back in X position), the two triggers may actually show as a pair of axis (each with values on a 0-1.0 scale) instead of as a trigger. On ours the left trigger is axis 2 and the right is axis 3 but you can use the USB section of the driver station to determine yours. This then looks more like the following. Code:
if(stick.getRawAxis(3) > .5) { Code:
motor.set(stick.getRawAxis(3)); |
| All times are GMT -5. The time now is 09:45. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi