Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Driving straight with mecanum and IMU (http://www.chiefdelphi.com/forums/showthread.php?t=154387)

Black50000 28-01-2017 14:52

Driving straight with mecanum and IMU
 
I was working on a button that would allow us to strafe perfectly straight, but it was very jerky.

How do you use an ADIS16448 to help Mecanum dive strafe smoothly and straight?

flemdogmillion 28-01-2017 19:46

Re: Driving straight with mecanum and IMU
 
Before I get started, it's really complicated and hard to perfect. Are you sure you need this?

If yes, read on.

You will need some kind of PID algorithm. Those VIs are located in the Control and Simulation palette. Read up on them a lot, and you will learn much.

As for the IMU, there is a LabVIEW VI set you can get off GitHub. the links are in this page, or rather, its derivative pages.


All times are GMT -5. The time now is 04:56.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi