Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Ragnarok Teaser (701) (http://www.chiefdelphi.com/forums/showthread.php?t=154427)

niklas674 29-01-2017 10:57

pic: Ragnarok Teaser (701)
 

flemdogmillion 29-01-2017 10:58

Re: pic: Ragnarok Teaser (701)
 
Did you build that entire sideplate from 1/4" milled aluminum?

edesirim 29-01-2017 11:25

Re: pic: Ragnarok Teaser (701)
 
That whole side plate was milled out of 3/16" aluminum stock.

Bruceb 02-02-2017 12:55

Re: pic: Ragnarok Teaser (701)
 
Quote:

Originally Posted by edesirim (Post 1637754)
That whole side plate was milled out of 3/16" aluminum stock.

Dang looks really heavy

D_Price 02-02-2017 14:19

Re: pic: Ragnarok Teaser (701)
 
Looking good can't wait to see the final product!

Cothron Theiss 02-02-2017 14:51

Re: pic: Ragnarok Teaser (701)
 
Oh wow. When I first saw it, I thought it was plasma cut. What cutter were you using on the lettering? It looks like you didn't quite get all of the material.

FRC6055 02-02-2017 15:39

Re: pic: Ragnarok Teaser (701)
 
Don't you love it when you try to post a simple teaser and everyone starts to pick you apart on little details! ::rtm::

It looks awesome and we look forward to what you come up with. If the robot turns out half as awesome as the name it will be great. You might even say it will be ...."end of all things!"

edesirim 03-02-2017 03:46

Re: pic: Ragnarok Teaser (701)
 
Quote:

Originally Posted by Bruceb (Post 1639489)
Dang looks really heavy

We're looking into that!

Quote:

Originally Posted by FRC6055 (Post 1639582)
Don't you love it when you try to post a simple teaser and everyone starts to pick you apart on little details! ::rtm::

It looks awesome and we look forward to what you come up with. If the robot turns out half as awesome as the name it will be great. You might even say it will be ...."end of all things!"

Thank you very much! We are super excited for what we have in store for the teams this year and can't wait to show it off at comp. As for the cutting, I believe the pocketing on the material did not go all the way through, but a little filing will do. Thanks for all the feedback and good luck to all the teams!

niklas674 03-02-2017 10:08

Re: pic: Ragnarok Teaser (701)
 
Quote:

Originally Posted by Cothron Theiss (Post 1639561)
Oh wow. When I first saw it, I thought it was plasma cut. What cutter were you using on the lettering? It looks like you didn't quite get all of the material.

We used an 1/8th inch carbide for the lettering. We still had a little bit of clean up to do after we took the picture.


All times are GMT -5. The time now is 05:15.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi