Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Setting motor speed (http://www.chiefdelphi.com/forums/showthread.php?t=154569)

crc540 01-02-2017 08:10

Setting motor speed
 
How do you set a reduced power/speed to a motor or do you set a variable to the joystick.

Mark McLeod 01-02-2017 08:32

Re: Setting motor speed
 
If it's based on a joystick axis, then just multiply the axis output by the percentage maximum power you want before you send it to the motor, e.g., (axis 1 * .7 = 70% power)

crc540 01-02-2017 08:57

Re: Setting motor speed
 
Mark how can I do that. Thank you for your help

Mark McLeod 01-02-2017 09:00

Re: Setting motor speed
 
Here's an example: http://www.team358.org/files/program...ickMaxThrottle

The right half is a simple throttle limit.

crc540 01-02-2017 09:04

Re: Setting motor speed
 
Thanks Mark


All times are GMT -5. The time now is 05:01.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi