Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   Flashing OM5p-ac router help (http://www.chiefdelphi.com/forums/showthread.php?t=154666)

TeamImp219 03-02-2017 17:15

Flashing OM5p-ac router help
 
We are trying to flash an OM5P-AC router that will be put on our robot this year, and we are following the guide on FIRST's website but when we tried to configure the router we got the error "Bridge configuration failed: failed to change IP address, please ensure the bridge is connected to this computer and try again. We finished loading the firmware and then entered our team number, robot name, and have firewall and BW limit checked with the router connected to our computer and the power in. Does anyone know what is going wrong? ;) ;) ;) ;) ;)

FlamingSpork 03-02-2017 17:29

Re: Flashing OM5p-ac router help
 
Have you made sure that your computer is not connected to any wireless networks? That's been an issue for my team.

TeamImp219 03-02-2017 18:31

Re: Flashing OM5p-ac router help
 
The computer is not connected to any other Ethernet devices or wifi connections. It seems the computer may not be detecting the router for some reason.

Sky Captain 03-02-2017 19:03

Re: Flashing OM5p-ac router help
 
Are you able to ping the router's default IP address? Are you running the config utility in administrator mode?

thecoopster20 03-02-2017 21:47

Re: Flashing OM5p-ac router help
 
One issue I found was with the power supply. I had a power cord that plugged into the wall, and that didn't provide enough power for whatever reason. Yet when I had the routers plugged into the supply from the robot, worked like a charm.

scca229 03-02-2017 23:48

Re: Flashing OM5p-ac router help
 
Make sure that the ONLY network interface that is NOT disabled (not just having wifi turned off, but fully disabled in the Adapters settings window) is the wired ethernet port on the machine. Basically the machine's network adapters should be configured as if it was sitting in the Player Station on the field.

Make sure that the port on the radio that the ethernet cable is plugged into is the one AWAY from the power plug (the one that would NOT be connected to the roboRIO).

npetrie3 04-02-2017 19:15

The thing that ended up working for our team was to load firmware though a network switch. It helps with timeouts.


Sent from my iPhone using Tapatalk

MuskieProgramme 04-02-2017 19:34

Re: Flashing OM5p-ac router help
 
Since a large number of teams are having trouble with this, I decided to screenshot the screens I used to accomplish this (Windows 10).

http://imgur.com/a/Q9Gkr

Go to "Network and Sharing Center"
Click "Change adapter settings" -> This will open "Network Connections"
Right click and select "disable" for every connection listed OTHER THAN the one to the roboRIO.


All times are GMT -5. The time now is 00:12.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi