Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   Not able to connect with DS but able to deploy code (http://www.chiefdelphi.com/forums/showthread.php?t=154699)

Jonathan L. 04-02-2017 01:38

Not able to connect with DS but able to deploy code
 
I am having a connection issue that only affects the Driver Station from connecting to the roboRIO. All my teammate's computer's do not have this problem. I am able to ping the roboRIO via command prompt and deploy LabVIEW code to the roboRIO-1094-FRC.local address over wifi. When I bring up the driver station the radio and roboRIO LEDs on the diagnostics page show green but I cannot get the communications LED (the one beside robot code) to turn green. I have tried wifi, Ethernet, and USB connections with no success. I have made sure my computer's IP address is automatic and all network connections except the one in use are disabled. I do not believe I had this issue last year.

Any suggestions? Thank you!

Tom Line 04-02-2017 02:11

Re: Not able to connect with DS but able to deploy code
 
Check to make sure you have the team number set in the driver station settings.

Jonathan L. 04-02-2017 02:26

Re: Not able to connect with DS but able to deploy code
 
Quote:

Originally Posted by Tom Line (Post 1640209)
Check to make sure you have the team number set in the driver station settings.

The team number has been set. I am not sure if I have tried re-typing it while I am trying to connect yet though. Thank you.

Tom Line 04-02-2017 03:26

Re: Not able to connect with DS but able to deploy code
 
Also doublecheck your firewall is allowing the driverstation through.


All times are GMT -5. The time now is 00:13.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi