Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Switching Between Two Cameras in LabView (http://www.chiefdelphi.com/forums/showthread.php?t=154728)

spyguy518 04-02-2017 14:45

Switching Between Two Cameras in LabView
 
We have figured out how to run two cameras in LabView (display image from both cameras on Dashboard) at low resolution. But we are trying to figure out a way to use a button on our remote to toggle between cameras, in order to be able to run at a higher resolution. Does anybody have any ideas that could help???

flemdogmillion 04-02-2017 18:01

Re: Switching Between Two Cameras in LabView
 
The Search function of Chief Delphi would be very helpful here.

TigerVision 05-02-2017 17:50

Re: Switching Between Two Cameras in LabView
 
Quote:

Originally Posted by spyguy518 (Post 1640362)
We have figured out how to run two cameras in LabView (display image from both cameras on Dashboard) at low resolution. ???

Can you give a little more detail about how you run two cameras in LabView? I followed the instruction from another thread "2 cameras": duplicate the initial USB 0 camera setup in the default project code Vision Processing.vi for a second camera, change the values for the second camera like USB 1 and camera 2. At the Dashboard, I can see the images from either camera or camera 2, but not both at the same time.

Did you do anything special to get it working ?

Thanks!

grosh 07-02-2017 13:10

Re: Switching Between Two Cameras in LabView
 
You have to lower the FPS to 10 and set the Compression to 50% in the dashboard on each of the cameras.


All times are GMT -5. The time now is 02:00.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi