Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Double Solenoid in Autonomous (http://www.chiefdelphi.com/forums/showthread.php?t=154847)

mrlembke 06-02-2017 17:54

Double Solenoid in Autonomous
 
Would anyone know how to add a double solenoid to autonomous? I have heard mixed things when being told where to add the code. I have a working compressor, and a functioning double solenoid in telop.

I was trying to set up a program that has the robot move backwards for a time, activate the solenoid, and then move forward.

Any help would be great, thanks!

Mark McLeod 06-02-2017 18:00

Re: Double Solenoid in Autonomous
 
1 Attachment(s)
The solenoids should be created/Open'ed in Begin.vi and used in Autonomous and Teleop.
Like this: http://www.team358.org/files/program...DoubleSolenoid

where the Teleop code can also be placed in Autonomous Independent.

Specific autonomous programming will depend on what you currently have and how you are implementing it.
Here is one way of approaching it:


All times are GMT -5. The time now is 01:59.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi