Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Sending serial from RPI to rio using uart (http://www.chiefdelphi.com/forums/showthread.php?t=154912)

Jacob_schopp 07-02-2017 19:08

Sending serial from RPI to rio using uart
 
I was wondering as to a method of receiving UART on the Rio and any applicable code examples. Any links and references would be greatly appreciated.

-jacob

FlamingSpork 07-02-2017 19:55

Re: Sending serial from RPI to rio using uart
 
If you want to use serial from the Pi to the RIO, your best bet would be running from the TTL serial connection on the Pi (a part of the GPIO pins if configured correctly) to a TTL to RS232 adapter and then on to the RS232 port on the RIO.

Jacob_schopp 07-02-2017 20:03

Re: Sending serial from RPI to rio using uart
 
What might the Rio programming side look like?


All times are GMT -5. The time now is 01:04.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi