Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Robot Main error (http://www.chiefdelphi.com/forums/showthread.php?t=155065)

RoboBucs 10-02-2017 18:47

Robot Main error
 
I was working my way through trying to program vision, and after I completed it, having no errors, I opened up Robot Main to deploy the code to test it, however, robot main included broken wires. It appears that the normal connectors where the wires go have disappeared from the vision block. Any ideas?

Mark McLeod 10-02-2017 19:05

Re: Robot Main error
 
1 Attachment(s)
You either deleted Error Out in Begin.vi, or Error In inside any of the other five vi's on that broken chain.
Probably Vision if that's what you were working on.

You also seem to have disconnected the Image Size global input on Vision as well.

You can create a new project and copy/paste the missing Error input/output and see where it gets attached.
Then it needs to be reconnected to a node on the vi.
- Go to the Vision (if that's where it was missing) front panel and look in the upper right corner for the I/O node layout.
- click on the empty white node box in the lower left and then click on the Error In you just added to the front panel.

RoboBucs 11-02-2017 15:06

Re: Robot Main error
 
Got it, thank you!


All times are GMT -5. The time now is 19:50.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi