Chief Delphi - Chiaphua Spec Sheet

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - Chiaphua Spec Sheet (http://www.chiefdelphi.com/forums/showthread.php?t=1576)

Joe Johnson

08-01-2002 16:49

Chiaphua Spec Sheet

1 Attachment(s)

I suppose that 3 days is enough time to wait for FIRST to upload the spec sheet for the Chiaphua Motors.

I got this directly from Chiaphua (knowing motor manufacturer's by name is worth something ;-)

Hope this helps.

Joe J.

Anton Abaya

08-01-2002 16:54

/me bows to the god.

Katie Reynolds

08-01-2002 17:31

Thanks!

THANK YOU!!!

- Katie

Larry Barello

08-01-2002 22:10

Chiaphua motor spec

Something seems wrong with the spreadsheet: it claims 300 oz-inch torque from the motor at stall.

Doesn't that seem just a tad high, like 10 or 20x ?Team #492

Joe Johnson

08-01-2002 22:37

I think is it right.

Joe Ross

08-01-2002 22:53

Re: Chiaphua motor spec

Quote:

Originally posted by Larry Barello
Something seems wrong with the spreadsheet: it claims 300 oz-inch torque from the motor at stall.

Doesn't that seem just a tad high, like 10 or 20x

remember that the stall torque is given in oz-in and not foot pounds or newton meters like the other motors.

Larry Barello

08-01-2002 23:13

Doh

That would explain the 10-20x error .... ;^)

Marc P.

09-01-2002 06:25

Re: Chiaphua motor spec

Quote:

Originally posted by Larry Barello
Something seems wrong with the spreadsheet: it claims 300 oz-inch torque from the motor at stall.

Doesn't that seem just a tad high, like 10 or 20x ?Team #492

When converted to the 315 oz-in of stall torque would be 2.23 nM, using 1Nm = 141.5 oz.in.

EStokely

09-01-2002 12:59

Everyone is ahead of me.
I also thought that seemed high and went here to post the same question that Larry did, only to find out I can't read!
oz-inches are not foot -pounds
Thanks all
And a HUGE thanks to Joe!!!!!

Eric

Frank(Aflak)

08-01-2003 19:09

bah, I can't find any other specs, can I get some linkage?

like for the other motors. . . i found them the other day, but couldn't find them again . . . .

sanddrag

08-01-2003 19:16

Quote:

Originally posted by Frank(Aflak)
bah, I can't find any other specs, can I get some linkage?

like for the other motors. . . i found them the other day, but couldn't find them again . . . .

This is for the motors for LAST YEAR and the Van Door from 2001.
www.team696.org/motorspecs.html

Marc P.

08-01-2003 22:45

wow... old thread heh

Brandon Martus

09-01-2003 16:01

Note; this thread is from last season.

All times are GMT -5. The time now is 15:12.