it should have come with your manual.

O_O?
 

is the blueprint in the manual the same as it is in the website?? because we didnt get the kit yet.....:(

we all got the blueprints, check in your teams official game manual

Has anyone found a good drawing yet of how to build the platform and ramps? The drawing that came with the rulebook is about useless. Last years goal drawing was good.

Actually, if i could remember, last years goal blueprints were a little hard to read when trying to build it from scratch. *or maybe it's just the tools i had availible to me:rolleyes: *

Cheap Ramp Structure BOM
 

Modified BOM of Ramp Structure
used at NYC Remote Kickoff: $230
for 2 ramps and 1 platform
Everything is from Home Depot except the wire mesh floor.

-----------------------------
A single ramp
5 2x6x8 ft.
1 2x6x4 ft.
1 2x4x4 ft,
-----------------------------
Ramp side panels
2 2x4x1/4 plywood
1 1x6x8 ft. (side rail)
-----------------------------
A single platform Section
5 2x6x 5'9" (use end pieces for legs)
2 2x6x 4 ft.
4 2x6x 1'11.5" (see item 1)
2 2x4x 3'10.5"
2 1x4x 5'9"
-----------------------------
Platform floor
3 2x4x1/4 plywood
-----------------------------
Platform side panel
1 2x4x1/4 plywood
-----------------------------
2 4x8 wire mesh $50 at McNichols Co.

*Contructure Time: 2 people for 10 hours.
(will post pictures soon)

Good Luck!:)

Mesh & HDPE are really important!
 

The traction on the mesh and (lack of it on the) HDPE are really important to understand. The HDPE was fairly slippery on the top. The mesh makes it hard to push bins up or down.