Sensible Torque/Speed/Current Graphs
 

Does anyone know if somewhere there has been put together an organized set of torque-speed curves for the different motors in a consistant format with consistant units. I'm trying to get a relative sense of the capabilities of all of these motors and I'm not very good yet at mentally converting oz-in, to In-lb, to N-m. + if the same format were used for all of the graphs it would be less of a puzzle figuring out how to read each one and how to compare two completely differently graphed curves. If this doesn't exist I guess I'll have to make it when I find some free time after this competition.

Most of what you want is in a the Whitepaper section of this web site. I have a spreadsheet called something like "First Motor Calc". With it you can calculate the speed torque curves of any of the motors in the kit. The data from the historical motors are in the file, ranked by power. You can easily add the new motors.

Good luck.

Joe J.

I found what I was looking for at

http://www.chiefdelphi.com/forums/pa...per&paperid=15

In case anyoone wants to know.

Thanks :)